Abstract:The relationship between thermal insulation properties and porosity of fly ash based foam concrete was built, in which effective density, effective heat conductivity, and effective specific heat of fly ash based foam concrete were deduced as functions of porosity. Using the model, the effective heat conductivity of density of 580 kg/m(3) fly ash based foam concrete was the theoretically calculated as 0.145 W/(m K) while the experimental measured value was 0.142 W/(m K). The relative error of heat conductivity was very low at 2.1%. The effective specific heat within the model was 967.05 J/kg K and the experimental value was 920 J/kg K with a relative error of 5.1%. Then, the effective heat conductivity and specific heat models were incorporated into heat transferring model to calculate the temperature field of fly ash based foam concrete wall during a fire incident. Finally, the temperature field of fly ash based foam concrete wall and traditional dense concrete wall during fire incident were calculated and compared. Comparing the temperature field of the fly ash based foam concrete wall with the traditional concrete wall, it was found that at close to fire-side surface, the temperature in the fly ash based foam concrete wall could reach 1039 C, while the lowest temperature in the fly ash based foam concrete wall remained at 20 C for a thickness of 7 mm. In contrast, at close to fire side of surface, the temperature of traditional concrete wall was 987.2 C at 360 s and the lowest temperature in the traditional wall was 102.9 C at the opposite side-wall surface far away from the fire direction. As expected, the data demonstrated that the use of fly ash based foam concrete in wall construction adds greatly to the time for people to leave in safety.

Temperature field in concrete hollow-slab exposed to fire

Experimental Study on Temperature Field of Concrete Member Due to Fire Exposure on One-Side

Temperature field of reinforced concrete shear walls exposed to fire

Numerical Simulation of Porosity on Thermal Properties and Fire Resistance of Foamed Concrete

Finite Element Analysis Of Temperatures In Concrete Filled Double Skin Steel Tubes Exposed To Fires

Performance of Concrete Structure after Fire Disaster Based on Thermal Stress Coupling Field Analysis

Temperature distribution in concrete-filled steel tubes with square cross-sections under two-side fire

Temperature distribution in concrete-filled steel tubes with square sections under two-opposite-side fire

Numerical study on temperature distribution of high-strength concrete-filled steel tubes subjected to a fire

Experiment and Analysis on Temperature Distribution of Prestressed Concrete Beams and Slabs

Effect of contact thermal resistance on temperature distributions of concrete-filled steel tubes in fire

Experimental Study of Behavior Characteristics of PC Hollow Slab Beam Exposed to Fire

Experimental study on fire damage to slab of exit flue of shield tunnel

Experimental Study on the Section Temperature Field of Steel-concrete Composite Slabs Under Fire

Temperature Distribution in Concrete-Filled Steel Tubes with Rectangular Cross Section under Three- Side Fire

ANALYSIS OF THE TEMPERATURE FIELD OF REINFORCED CONCRETE STRUCTURE

Experimental Research on Heat Transfer and Mechanical Properties of Concrete Subjected to Elevated Temperature During the Water-Cooling Process

Study on the Temperature Distribution Law of Thermoelastic Coupling Field in Concrete Pavement under Tunnel Fire

Effect of elevated temperature on thelow-velocity impact performances of reinforced concrete slabs

Analysis of Temperature Distribution in Steel Reinforced Concrete Columns Against Fire

Theoretical Study on Fire-Resistance of Concrete Structures-An Overview