Abstract:A decade more from copper stave introduced form abroad to now, it has been widely used on bosh, belly as well as under shaft of blast furnace larger than 1000 m3 in China. Because of short time use, phenomena of naked or scaffolding on copper stave hot face happened occasionally which had serious influence on production. Enterprises urgently need to know what operational factors restricted the accretion~s remove on copper stave. Some steel compa- nies adjusted cooling water flow rate and temperature, which had little work frequently, to realize forming-accretion thickness and stability control. The heat transfer mathematic model of furnace wall shows as follows： the forming- accretion thickness change little which indicates that adjusting water speed and temperature in certain range has little effect on forming-accretion thickness~ the leading influencing factors are peripheral gas flow temperature and cooling stave heat flux;according to effect of peripheral gas flow on forming-accretion thickness of copper stave, peripheral gas flow temperature is divided into rapid change area, gradual change area, slowly change area and the subtle change area. Blast furnace production practice in Ansteel, Tangsteel as well as Wusteel confirmed the correctness of the results above. Researching results clear up some vague realization of affecting forming-accretion thickness, which has important instruction meaning to copper stave blast furnace production. Forming-accretion morning sys- tem developed on the basis of heat transfer mathematic model of furnace wall, which has tested by actual measure- ment, has been applied to a blast furnace in certain civil steel company, and heat load control standard of 35-58 kW/ m2 has been suggested for copper stave operation.

Thermal Test and Optimization of Heat Transfer Performance of Blast Furnace Copper Stave

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Numerical simulation of steel-copper-steel composite cooling staves: Heat transfer characteristics and structural optimization

Thermo-Mechanical Coupling Finite Element Analysis of Blast Furnace Copper Staves

Recommendations on Reasonable Operation of BF Copper Stave

Investigation on Heat Transfer in Molds with Different Water-Cooling Structures Under Billet High-Speed Continuous Casting

Cooling Stave Selection above Blast Furnace Tuyere

A Computational Study of the Blast Furnace Cooling Stave Based on the Analysis of Heat Transfer

3D Transient Heat Transfer Simulation and Optimization for Initial Stage of Steel Continuous Casting Process

Three-Dimensional Thermal-Stress Coupled Field's Numerical Simulation of the Maze Composite Cooling Structure Tile

Heat transfer behaviour of funnel mould copper plates during thin slab continuous casting and channel structure optimization

Study on Temperature Model and Self-Adaption for Finishing Stands of Hot Strip Mill

Microstructural Characteristics of Copper–Steel Composite Cooling Staves After Long-Term and High-Temperature Service

Numerical simulation for heat transfer behavior of copper slag ladle under air-cooling mechanism

Computational Study of Blast Furnace Cooling Stave using Heat Transfer Analysis

Numerical Simulation of Flow and Temperature Fields in the Radiation Chamber of a Waste-Heat Boiler for Copper Flash Smelting

Temperature Field Analyses of Lining With Cooling Plates and Stave for Blast Furnace

A Three Dimensional Real-time Heat Transfer Model for Continuous Casting Blooms

Convective heat transfer boundary equivalent replacement and model simplification of cooling stave of blast furnace hearth

Three-dimensional numerical simulation on thermal performance in counter flow natural draft cooling tower

Thermo-mechanical simulation and parameters optimization for beam blank continuous casting