Abstract:A high-temperature measurement fiber sensor based on the Vernier effect is proposed and demonstrated. The sensor comprises two parallel Fabry–Perot interferometers (FPIs) constructed by the splicing of the single-mode fiber (SMF) and a micrometer-scale dimensions suspended-core fiber (SCF). These two parallel interferometers possess a high degree of symmetry and both packaged with a hollow core fiber (HCF) to provide resistance against external pollution. The HCF is charged to collapse on the other side, but the length of SCF differs between them. High-temperature tests were conducted on both a single sensing FPI and parallel structures. The impact of the reference units with different free spectrum ranges (FSRs) on the sensitivity of parallel structures was investigated through simulation and experimentation. Leveraging on the Vernier effect and the parallel structures, the sensor exhibited highest temperature sensitivities of −86.11, −99.01, and −112.66 pm/°C across a temperature range from 25 °C to 1000 °C. Furthermore, the parallel structures were subjected to three rounds of heating with a 24-h interval to verify their repeatability and stability. Additionally, a high-temperature stability error test was conducted on these tip-packaged parallel sensors, which exhibit simple fabrication, excellent repeatability, and stability across a wide temperature range. As such, they are expected to be highly practical for use in harsh environments and mass production.

In-line Fabry-Perot sensors based on hollow-core photonic bandgap fibers for high temperature applications

In-Line Fabry–Perot Etalons Based on Hollow-CorePhotonic Bandgap Fibers for High-Temperature Applications

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Pcf-Based Fabry-Perot Interferometric Sensor For Strain Measurement Under High-Temperature

Temperature and Strain Response of In-Fiber Air-Cavity Fabry-Perot Interferometer under Extreme Temperature Condition

High Temperature Strain Sensor Based on In-Line Fabry-Perot Interferometer Formed by Hollow-Core Photonic Crystal Fiber

High temperature microstructured fiber sensor based on a partial-reflection-enabled intrinsic Fabry-Perot interferometer.

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Fabry–Perot optical fiber tip sensor for high temperature measurement

High-temperature Measurement by Using a PCF-based Fabry–Perot Interferometer

In-line All-Fibre Fabry-Pérot Interferometer High Temperature Sensor Formed by Large Lateral Offset Splicing

High-temperature-sensitive and Spectrum-Contrast-enhanced Sensor Using a Bullet-Shaped Fiber Cavity Filled with PDMS

Highly Integrated Fp/Fbg Sensor for Simultaneous Measurement of High Temperature and Strain

Ultrahigh-Sensitivity Temperature Sensor Based on In-Fiber Fabry-Perot Interferometer

Simplified Hollow-Core Fiber-Based Fabry–Perot Interferometer With Modified Vernier Effect for Highly Sensitive High-Temperature Measurement

High-Sensitive and Spectrum-Contrast-enhanced Temperature Sensing by using a Bullet-Shaped Fiber Cavity filled with PDMS

High-Temperature Sensor Based on Fabry-Perot Interferometer in Microfiber Tip

All-fiber Miniature Fabry-Perot Interferometer As High Temperature Sensor

Tip-Packaged High-Temperature Fiber-Optic Sensor Based on Parallel Fabry–Perot Interferometers and the Vernier Effect