Abstract:The interdigital transducer (IDT) of the traditional Mach-Zehnder (MZ) acousto-optic modulator on a silicon-oninsulator (SOI) platform is located outside its two arms. The crest and trough of the surface acoustic wave (SAW) are used to modulate the two arms of the MZ interferometer so as to achieve a high modulation efficiency. Therefore, the distance between the two arms must be odd multiples of half acoustic wavelength. However, since the substrate is usually not uniform, the wavelength of the SAW changes as it transmits through the surface of the device. As a result, the exact distance between the two arms is difficult to choose. On the other hand, the SAW losses a portion of energy after passing through the first arm of the MZ interferometer, so the modulation of the second arm becomes much weaker. To solve these problems, we propose a new structure where its IDT is situated in the middle of the two arms of the MZ interferometer. With this scheme, the two arms of the MZ interferometer are located exactly at the crest and the trough of the SAW, while they are modulated with equal strength. In this paper, we first use the finite element method to simulate the acoustic frequency and the surface displacement of the excited SAW. Then we deduce the refractive index variations of all layers according to their acousto-optic effects. After that, we analyze the influences of different factors on the acousto-optic modulation efficiency, including the type and size of waveguide, the thickness of zinc oxide (ZnO) layer, and the area it covers, the number of electrodes, etc. These parameters are accordingly optimized to enhance the modulation efficiency. Modeling result based on COMSOL Multiphysics indicates that when the width of the strip waveguide is 6 mu m, the ZnO layer covers only the area under the IDT and has a thickness of 2.2 mu m, and the number of the electrodes is 50, the effective refractive index variation of the waveguide reaches 4.08 x 10(-4) provided that the amplitude of the driving voltage is 1 V. This value is 12% higher than that of the traditional structure.

Theoretical and Experimental Study of a Multi-Channel Acousto-Optic Device

Studies on the Operating Characteristics of Anisotropic Acousto-Optic Device with Multi-Transducers

Research of the Beam Steering Theory Based on Acousto-optic Effect

An improved Mach-Zehnder acousto-optic modulator on a silicon-on-insulator platform

Parallel Lensless Optical Correlator Based on Two Phase-Only Spatial Light Modulators.

Experimental study on acousto-optic modulation based on single-mode fiber fused coupler

Resonant Acoustooptical Interaction in Superlattices

Numerical and Experimental Analysis of a Focused Reflected Wave in a Multi-Layered Material Based on a Ray Model.

Collaborative optimization of phase and amplitude of composite signals for acousto-optic beam splitting technology

Coupling Mode Theory of Acousto-Optic Fiber Devices with Four Ports

The research of acousto-optic switch device for telecommunication

Dependence of Integrated Acousto-Optical Devices with One and Two Modulated Arms on the Static Phase Difference.

Investigation of acousto-optic interaction with momentum mismatching considering acoustic anisotropy in birefringent crystal

Numerical analysis of on-chip acousto-optic modulators for visible wavelengths

Progress of Thin-Film Lithium Niobate Acousto-Optic Modulators(Invited)

Taming Brillouin Optomechanics Using Supermode Microresonators

Optical Routing via High Efficiency Composite Acoustic Diffraction

Three-mode Optoacoustic Parametric Interactions with a Coupled Cavity

Effect of Square Shaped Acousto–Optic Modulators on the Bragg Diffraction

Acousto-Optic Interaction in Photonic Crystals with Defects

Acousto-optic and opto-acoustic modulation in piezo-optomechanical circuits