Abstract:Ultra-high-rise buildings require high concrete bearing capacity. Ordinary concrete often fails to meet the project requirements. Admixture of admixtures in concrete is a means of solution. Currently, studies on the incorporation of basalt fiber (BF) and fly ash (FA) in concrete are relatively mature. However, research on incorporating nano-Titanium Carbide (nano-TiC) in concrete is still relatively scarce, which has a lot of room for development. To further improve the mechanical properties of concrete, BF, and FA synergized with nano-TiC were incorporated into concrete to produce TBF concrete in this study. And Response Surface Methodology (RSM) was used to optimize the mechanical properties of concrete. The collapse and compressive deformation damage characteristics of concrete were analyzed. The microstructure of the cement matrix was analyzed by the SEM (Scanning Electron Microscope). An optimization model of the TBF concrete craving function was developed. Optimized ratios with compressive, split tensile, and flexural strengths as response objectives were obtained, and the accuracy of the optimized ratios was investigated using the same experimental conditions. The results of the study showed that FA increased the collapse of concrete, while nano-TiC and BF decreased the collapse of concrete. Under uniaxial compression, nano-TiC, FA, and BF together incorporated into concrete can improve its compressive damage state. Moderate amounts of nano-TiC, BF, and FA could improve the mechanical properties of concrete. Their optimal mixing ratio admixtures were 0.88%, 0.24%, and 5.49%, respectively. And the measured values under the same conditions were compared with the predicted values. The maximum difference in compressive strength was 6.09%. The maximum difference in split tensile strength was 7.14%. The maximum difference in flexural strength was 8.45%. This indicated that the accuracy of the RSM optimization model was good. A moderate amount of nano-TiC, FA, and BF could improve the densification of concrete.

Ductility of High Strength Concrete Containing Nano-Particles

A Study on Ductility of Nano-Particles Reinforced Cement-Based Composites

Flexural Fatigue Performance of Concrete Containing Nano-Particles for Pavement

Abrasion resistance and chloride permeability of concrete containing nanoparticles

Enhanced Impact Properties of Concrete Modified with Nanofiller Inclusions

Durability of Steel Fiber-Reinforced Concrete Containing SiO2 Nano-Particles

Application and Microstructure Properties of Nanomaterials in New Concrete Materials

Recent Progress in Nanomaterials for Modern Concrete Infrastructure: Advantages and Challenges

Hybrid effect of nano-alumina and nano-titanium dioxide on Mechanical properties of concrete

Research on mechanical properties of concrete by nano-TiC-BF-fly ash

Principle and Implementation of Incorporating Nanomaterials to Develop Ultrahigh-Performance Concrete with Low Content of Steel Fibers

Abrasion Resistance of Concrete Containing Nano-Particles for Pavement

Mechanisms underlying the strength enhancement of UHPC modified with nano-SiO2 and nano-CaCO3

Chloride Diffusion in Concrete Containing Nano-Tio2 under Coupled Effect of Scouring

Effect of nickel-coated carbon nanotubes on the tensile behaviors of ultra-high performance concrete (UHPC): insights from experiments and molecular dynamic simulations

Effect of Nano-Tio2 on the Mechanical Properties of Cement Mortar

Hybrid effects of carbon nanotubes and steel fiber on dynamic mechanical properties of ultra-high performance concrete

Bending Toughness and Calculation Model of Ultrahigh-Performance Concrete with Hybrid Micro- and Nanofillers

Studies on the Effect of Micro Silica Powder on Some Properties of High-Strength Steel Fiber Concrete

Study on the durability of marine concrete with nanoparticles under the coupling action of bending fatigue load, dry-wet cycles and Cl − corrosion

Study on the Constitutive Relationship between Ordinary Concrete and Nano-Titanium Dioxide-Modified Concrete at High Temperature