Abstract:Flexible sensors for high strain sensitivity and dynamic stability are important for the development of human-interactive and health-monitoring devices. However, establishing a stable conductive network with low-conductivity material filling that can resist tensile strain failure and achieve high device performance still faces significant challenges. Herein, a highly stretchable and sensitive strain sensor with strong dynamic stability and low conductive materials filling was fabricated based on highly conductive multi-walled carbon nanotubes(MWCNTs) and Fe nanowires(NWs) to construct a porous-designed bi-conducting network using a salt sacrificial template approach. The porous-designed Fe NW/MWCNT strain sensor(PFMS) with low material filling(3.6 wt.% Fe NWs and 10.6 wt.% MWCNTs) showed high sensitivity with a gauge factor(GF) of 134.98(strain range 0–22%) and 569.37(strain range 22%–60%), which is much higher compared with the pure MWCNT strain sensor with a GF of 7.46. This is attributed to the significant change in the contact area and contact resistance of the Fe NW/MWCNT bi-conducting network during tensile strain. In addition, the PFMS exhibited high repetitive stability over 2000 stretching-releasing cycles. When attached to the human body, the PFMS functions as a health-monitoring device, that can accurately distinguish human motions such as the bending of fingers, knees, and elbows. Finally, the proposed strategy pens a novel avenue for constructing porous conductive networks using polymer composites and is highly competitive for developing high-performance strain sensors.

A High Sensitivity Single-Walled Carbon-Nanotube-array-based Strain Sensor for Weighing

Recent Advances in Flexible Pressure/strain Sensors Using Carbon Nanotubes

Investigation on Strain-Sensing Suspended Single-Walled Carbon Nanotube Arrays

HIGH SENSITIVE FLEXIBLE-BASED SINGLE-WALL CARBON NANOTUBES THERMAL SHEAR STRESS SENSOR FOR UNDERWATER APPLICATIONS

Ultra-high sensitivity of super carbon-nanotube-based mass and strain sensors.

Fabrication of Ultra-High-sensitivity Flexible Strain Sensor Based on Single ZnO Nanowire

Sensitivity-Tunable Strain Sensors Based on Carbon Nanotube@Carbon Nanocoil Hybrid Networks.

Force-sensitive Sensor Based on Single-walled Carbon Nanotube Array

A carbon nanotube strain sensor for structural health monitoring

Ultrasensitive, Stretchable Strain Sensors Based on Fragmented Carbon Nanotube Papers.

Working Mechanisms of Strain Sensors Utilizing Aligned Carbon Nanotube Network and Aerosol Jet Printed Electrodes

Linear Strain Sensor Made of Multi-Walled Carbon Nanotube/epoxy Composite

Investigation of strain sensing mechanisms on the ultra-thin carbon nanotube networks with different densities

Carbon Nanotube Yarn Strain Sensors

Water-resistant carbon nanotube based strain sensor for monitoring structural integrity

High-density, highly sensitive sensor array of spiky carbon nanospheres for strain field mapping

Multi-Walled Carbon Nanotubes-Based Sensors for Strain Sensing Applications

Highly Sensitive and Dynamically Stable Strain Sensors Based on Porous-Designed Fe Nanowires/multi-Walled Carbon Nanotubes with Stable Bi-Conducting Networks

A High Gauge-Factor Wearable Strain Sensor Array Via 3D Printed Mold Fabrication and Size Optimization of Silver-Coated Carbon Nanotubes

Research on Microstrain Loading Device and Strain Detection Method Based on SWCNT Strain Sensor