Abstract:Wireless neural-recording instruments eliminate the bulky cables in multi-channel signal transmission, while the system size should be reduced to mitigate the impact on freely-moving animals. As the battery usually dominates the system size, the neural-recording chip should be low power to minimize the battery in long-termly monitoring. In general, a neural-recording chip consists of an analog front end (AFE) and an 8 bit $-$ 10 bit analog-to-digital converter (ADC), while it's challenging to design an ADC with an 8 $-$ 10 effective number of bits (ENOB) and sub- $\mu$ W power consumption due to the kickback noise. In this work, we propose a kickback-reduction technique for a successive-approximation-register (SAR) ADC based on neural-recording chip. Fabricated in 65 nm CMOS process, the proposed technique reduce the ADC power to 315 nW, resulting in an 8-channel neural-recording chip with 249 $\mu$ W in total. Measured results show that the chip achieves an ADC ENOB of 9.73 bits, as well as an AFE gain of 43.3 dB and input-referred noise (IRN) of 9.68 $\mu V_{rms}$ in a bandwidth of 0.9 Hz $-$ 7.2 kHz. Combined with a BLE chip and a PCB antenna, the chip is implemented into a 2.6 g wireless headstage system (w/o battery), and an in-vivo demonstration is conducted on a male Sprague-Dawley rat with Parkinson's disease. The headstage system transfers the in-vivo neural signals to a commodity smartphone through BLE, and the miniature size induces little impact on freely-moving activities.

A New 12-Bit Fully Differential Sar Adc for Wireless Implantable Neural Recording System

A 16-Channel 12-Bit Rail-to-rail Successive Approxmation Register ADC for AFEs

A Wireless Headstage System Based on Neural-Recording Chip Featuring 315 Nw Kickback-Reduction SAR ADC

A 12 μW 10 kHz BW 58.9 dB SNDR AC-Coupled Incremental ADC for Neural Recording

A 0.6-V 94-Nw 10-Bit 200-Ks/s Single-Ended SAR ADC for Implantable Biosensor Applications

A 110-nW in-channel sigma-delta converter for large-scale neural recording implants

Low Voltage Low Power SAR ADC for Implantable Medical Chips

A 10-Bit Reconfigurable ADC with SAR/SS Mode for Neural Recording

An Energy-Efficient Low-Noise Neural Recording Circuit with Multi-Sampling SAR ADC

A 10-bit low-power differential successive approximation ADC for implantable biomedical application

An 11 Bit 150 MS/s Sub-range SAR ADC IP for Wireless Transceiver

A single channel, 6-bit 410-ms/s asynchronous SAR ADC based on 3bits/stage

A 5ks/s 112nw Sar Adc for Portable Bio-Potential Acquisition System

A Low Power Cyclic ADC Design for a Wireless Monitoring System for Orthopedic Implants

A 12b 200KS/s SAR ADC with novel capacitor switching procedure and digital background calibration

Design of an Ultra-Low Power SAR ADC for Biomedical Applications

A 6.94-Fj/conversion-step 12-Bit 100-Ms/s Asynchronous SAR ADC Exploiting Split-CDAC in 65-Nm CMOS

A 5.8 nW 9.1-ENOB 1-kS/s Local Asynchronous Successive Approximation Register ADC for Implantable Medical Device

An ultra low power 10-bit 1KS SAR-ADC for ECG signal recording applications

A 10-bit 1kS/s-30kS/s successive approximation register analog-to-digital converter for biological signal acquisition

A 93.4-Db SNDR Single-Ended SAR ADC with a Hybrid R–C DAC