A 28-/60-GHz Dual-Band Receiver Front-End With Sideband-Selection Technique in 65-nm CMOS
Yiming Yu,Zijian Ouyang,Xingnuo Huo,Chenxi Zhao,Huihua Liu,Yunqiu Wu,Kai Kang
DOI: https://doi.org/10.1109/tcsi.2024.3432171
2024-10-04
IEEE Transactions on Circuits and Systems I Regular Papers
Abstract:This article presents a dual-band receiver front-end based on a reconfigurable Hartley architecture with double frequency conversion for millimeter-wave wireless communication. By controlling working states of band-select switches, the receiver is able to reach different RF bands without increasing or altering local-oscillator (LO) and intermediate-frequency bands. To reduce power consumption and save chip area, RF quadrature mixers are co-designed with the last stage of a dual-band low-noise amplifier and reuse its dc current. In addition, a self-mixing frequency tripler with a transformer-based compact hybrid is developed to multiply an input LO and provide quadrature LO signals for the RF mixers. The prototype receiver is demonstrated in a 65 nm CMOS process. Measurement results show that the receiver successfully covers two frequency bands of 24.6~28 GHz and 55.6~60 GHz, and the corresponding peak conversion gains are up to 24.5 dB and 26.3 dB, respectively. In these two bands, the minimum single-sideband noise figures are 7.5 and 7.8 dB. The tested image-rejection ratio of the dual-band receiver is better than 30 dB in both 26.5~30.0 GHz and 57.5~60.5 GHz bands. Besides, the receiver also demonstrates its capability of supporting up to 256QAM modulation and 3.2-Gb/s data-rate transmission.
engineering, electrical & electronic