Abstract:This paper presents an anthropomorphic prosthetic hand, which has a thumb and four fingers, all the fingers of which are driven by servomotors built into the fingers and the palm. A novel flexible three-axis tactile sensor array have been investigated for their suitability to measure the grip forces exerted upon an object held by a prosthetic hand. The tactile sensor array are placed at the thumb of prosthetic hand with the capability of measuring both normal and shear force distribution using quantum tunneling composite (QTC) as a base material. A joystick-like mesa was attached to a sensor base to transfer external force, and there are four fan-shaped electrodes in a cell to decompose the contact force into normal and shear components. The sensor has been realized in a 2 × 6 array of unit sensors, and each unit sensor responds to normal and shear stresses in all three axes, respectively. The zero potential method is used to avoid crosstalk effect by setting all drive lines (row electrodes), which do not involve the measuring point at zero voltage and also by setting all output lines (column electrodes) at zero voltage. Measurement of a single sensor shows that the full-scale range of detectable force are about 10, 10 and 22 N for the x-, y- and z-directions, respectively. The sensitivities of a cell measured with a current setup are 0.47, 0.45 and 0.16 mV/mN for the x-, y- and z-directions, respectively. The sensor showed a high repeatability, low hysteresis, and min tactile cross-talk. The proposed flexible three-axial tactile sensor array can be applied in a curved or compliant surface that requires slip detection and flexibility, such as a prosthetic hand.

Theoretical Research On A Six-Axis Accelerometer For Humanoid Robot Wrist

Study on structural parameters of a six-axis accelerometer for humanoid robot hand

Structural research on a six-axis accelerometer for picking robot wrist

Design And Characterization Of A Six-Axis Accelerometer

Design and Characterization Papers of a Novel Six-Axis Accelerometer

Integrating Human Factors in the Systematic Mechanical Design of NPU-Wrist Rehabilitation Robot

An Improved Wrist Kinematic Model for Human-Robot Interaction

Design of Humanoid Robotic Hand Based on Link Underactuation

Identification Of Robot'S Inertial Parameters Based On 6-Axis Wrist Force Sensor

Task-oriented design method and research on force compliant experiment of six-axis wrist force sensor

Principle Research on a Single Mass Six-Degree-of-Freedom Accelerometer with Six Groups of Piezoelectric Sensing Elements

Analyzing the Dynamical Characteristics of the Wrist Force Sensor Based on ADAMS

A Novel Design on the 12-DOF Force and Acceleration Sensing

Interaction force measurement of robotic manipulator based on 12DOF force sensor

Study of Principle of a 6-DOF Accelerometer

Design and Analysis of Underactuated Humanoid Robotic Hand Based on Slip Block-Cam Mechanism

DEVELOPMENT AND EXPERIMENT ANALYSIS OF ANTHROPOMORPHIC PROSTHETIC HAND WITH FLEXIBLE THREE-AXIS TACTILE SENSOR

Miniature Robust Five-Dimensional Fingertip Force/torque Sensor with High Performance

Principle Research On A Single Mass Piezoelectric Six-Degrees-Of-Freedom Accelerometer

Research on Robot Surface Tracking Motion Based on Force Control of Six-Axis Wrist Force Sensor

Principle Research on a Novel Piezoelectric 12-DOF Force/Acceleration Sensor.