Abstract:This article proposes a support diminution design method for layered manufacturing of manifold surface based on variable orientation tracking (VOT). We aim at reducing the external support or upholders to a minimum with maximum possibility theoretically to save material and diminish material stripping effect ( MSE), thereby improving the bilateral surface precision either exterior or interior. The cosmic gravity effect criterion is first used to extract surface need support from manifold surface with various materials by considering the balance force involving material characteristics and inclination angle. In the light of this criterion theory, varying the substrate normal orientation (SNO), namely workbench, for each layer in printing coordinate system, may break the balance between gravity and its equilibrium force. Therefore, the optimal SNO can be rigorously calculated using mathematical harmonic analysis among the continuous domain. To serve for the multidegree of freedom (DOF) on account of SNO, a reconfigurable VOT robot with six-axis DOF is developed for 3D printing (3DP). The matched servo controller is successfully implemented to accurate tracking of both orientation and Cartesian coordinates, using forward kinematic chains as well as reverse kinematic tracking. What is more, the endeffector (extruder) is holding perpendicular to the substrate workbench. The physical experiment that takes human external ear auricle, for example, using a layer-based process is implemented via VOT. The MSE due to supporting material can be clearly observed and diminished using an optical microscope. The stripped material from external support via diminution design can be evaluated quantitatively by electronic weighting balance. All of which indicate the findings that external support in 3DP can be virtually reckoned and diminished using VOT rather than the so-called build orientation traversal method. The VOT method upon which we touched can be widely applied to various layered manufacturing of accurate structure, for instance, cantilever, sandwich, and scaffolds in the occasion needing precise curtailment of outer support multimaterial.

Slant wall structure support and its auto-generation algorithm using STL model

Efficient Algorithm for Automatic Toothed Support Structure Generation in Rapid Prototyping

Support generation for additive manufacturing based on sliced data

Build Orientation Optimization for Extrusion-Based Additive Manufacturing Coupling with Adaptive Slicing

Support Diminution Design for Layered Manufacturing of Manifold Surface Based on Variable Orientation Tracking

Self-supporting Topology Optimization for Additive Manufacturing

Design and Validation of 3D Self-Supporting Structures and Printing Paths for Multi-Axis Additive Manufacturing

Geometry-based Adaptive Surface Mesh Generation for STL Models

Topology Optimisation of Self-Supporting Structures Based on the Multi-Directional Additive Manufacturing Technique

Toward Support-free 3D Printing: A Skeletal Approach for Partitioning Models.

Fast Surface Mesh Generation for STL Models

Layout and Geometry Optimization Design for 3D Printing of Self-Supporting Structures

Research on GMAW Based Non-Supporting Thin-Wall Structure Manufacturing

Building Orientation Determination Based On Multi-Objective Optimization For Additive Manufacturing

Efficient cutting area detection in roughing process for meshed surfaces

Optimization design of support structure based on 3D printing technology

Path Planning of Complicated Hierarchical Thin-Wall Structures Using Multi-Material Additive Manufacturing Technology

Generation Algorithm of a Novel Platform Attached Support Structure for FDM-Fused Deposition Modeling

A Trivariate T-spline Based Direct-Slicing Framework for Support-Free Additive Manufacturing

Generating Hybrid Interior Structure for 3D Printing

Spherical Path Planning for Multi Axis Support Free Additive Manufacturing of Truss Structures