Abstract:Considering the inherent advantages of the Light Emitting Diode (LED) in the field of illumination, this work designs an intelligent supplementary lighting system using LED as the light source. Combining microcontroller and electronic circuit theory, the circuit is built with the microcontroller PIC16F873 as the core control chip. The system utilizes an external 220 V AC-20 V DC conversion power supply, hence operating on a 20 V DC power source. The system consists of four hardware parts: the onboard power supply uses TI-produced TPS54331 as the control chip to achieve voltage conversion; the external signals (flashing and burst flashing signals) are isolated from the microcontroller through an optocoupler circuit; the PWM pulses output from the microcontroller’s RC1/CCP2 pins drive the corresponding switching tubes to achieve the flashing function; the flashing synchronization signal is output externally after optocoupler isolation, and its synchronous output with the flashing signal is achieved through an optocoupler after LED conduction; the circuit is established using TI-produced differential bus transceiver SN65LBC184D to convert the external 485 differential signal to the level signal required by the microcontroller. In the experiment, after completing the hardware design, connecting the LED panel, and debugging the test program, it is found that the designed lighting system has a good supplementary lighting effect. According to the PWM output waveform, the flashing effect meets the design expectations. The Hadoop big data computing platform is introduced. Simulation testing reveals that under no backlight conditions, the system achieves an illumination intensity of around 20 klx at a distance of about 10 meters. With backlight conditions, the system maintains an illumination intensity of around 1.5 klx at a distance of about 10 meters. Further calculations are performed to analyze the variation in foot traffic within the test area’s illumination over 24 hours. The total illumination intensity during different time intervals is compiled, confirming that the system can autonomously adjust the illumination intensity of the area based on changes in foot traffic.

Research Of Feedback Control Of Lighting System Based On Dali

Development and Research of Lighting System Based on DALI

A Digital Controller Based on Primary Side Regulation with Improved Accuracy for LED Application

Indoor Lighting System Based on Intelligent Detecting Technology

Design of Lighting System Controller Based on Low-voltage Power Line Carrier Communication

The Application of Digital Addressable Lighting Interface in HID Lamps' Electrical Ballast

Controlling System of Self-adaptive Signal Lighting

A Distributed Intelligent Lighting Control System Based on Deep Reinforcement Learning

Automatic Monitoring and Controlling LED Energy Saving Lighting System Based on C8051F020 MCU

Research on Dynamic Weak Current Dimming and Energy Saving System of Intelligent Lighting System Based on Automatic Control Theory

A Smart Remote Controlled Multi-Functional Lighting System

A network control system for scene adaptive semiconductor lighting

Design and Research of Indoor Lighting Control System Based on the STM32

Low-Cost Implementations of LED Intelligent Lighting Based on DALI

Satisfaction Based Q-learning for Integrated Lighting and Blind Control

Design and Simulation Implementation of Indoor Lighting Integrated Control System Based on Fuzzy Control

Intelligent Light Emitting Diode Flashing Supplementary Lighting Control Design and Its Big Data Illumination Analysis

Intelligent Luminance Control of Lighting Systems Based on Imaging Sensor Feedback

A Color Temperature Tunable LED Lighting Controller Based on DALI Protocol

Development and Application Situation of Lighting Control Technology

Intelligent Light Control System Based on Zigbee