Abstract:Power density and efficiency are main specifications of on-board chargers (OBC) for electric vehicles (EV). Single-stage OBCs are advantageous in terms of efficiency and cost, while the double-line frequency variation on the DC side should be carefully considered in the design phase. The double-line frequency variation may cause large charging current ripples, and subsequently, affecting the battery lifetime. Large electrolytic capacitors can be used to reduce the ripples, which makes the overall system bulky. Hence, active power decoupling (APD) technologies are favorable in single-stage OBC applications. The paper studies a control of the bidirectional buck/boost type APD circuit for a single-stage LLC-OBC. There are three control loops in the control. As the inner control loop, APD inductor current is controlled to ensure the APD working in the stable region, the second control loop is battery charging current control which is applied to control the double-line frequency part of charging current equaling to zero. The outer loop is APD capacitor voltage control which fixes the DC part of APD capacitor voltage equaling to half of battery voltage. A proportional resonant controller is applied in second loop, proportional integral controllers are used in the inner loop and the outer loop. By combining the two kinds controller, the APD control strategy can achieve power decoupling effectively in OBC applications. the paper details the design of the APD control strategy. Finally, an LLC-OBC prototype with the APD is tested to verify the efficacy of the control design.

Li-Ion Battery Charger with Smooth-Switch-Over Four-Stage Control

Chip Design of Li-Ion Battery Charger Operating in Constant-Current/Constant-Voltage Modes

Fast charge circuit for lithium battery based on DSP control

Bi-directional On-Board Charger Architecture and Control for Achieving Ultra-High Efficiency with Wide Battery Voltage Range

A 4-Switch Buck-Boost DC-DC Converter with Seamless Transition

Design Of Multi-Mode 4-Switch Buck-Boost Controller

Integrated Optimization of Dual-Active-Bridge DC–DC Converter with ZVS for Battery Charging Applications

Switch-mode Multi-Power-supply Li-ion Battery Charger with Power-Path Management

A Green-Switch Controller IC for Cascade Buck-Boost Converter with Seamless Transition over Entire Input and Load Range.

A Smooth Mode-Switching Strategy for Bidirectional OBC Base on V2G Technology

Design and Implementation of Li-ion Battery Charger IC Based on Constant-Current/constant-voltage Approach

Li-ion Battery Charging Controller Based on Interruptible Constant Voltage-Constant Current Algorithm

Four-Switch Buck–Boost Converter Based on Model Predictive Control With Smooth Mode Transition Capability

Power Decoupling Control for Single-Stage On-Board Chargers

Design of Intelligent Battery Charger Based on Scm Double Closed-Loop Control

A Novel Switch-Mode Charger Controller Ic for Vrla Batteries

Searching for the optimal current pattern based on grey wolf optimizer and equivalent circuit model of Li-ion batteries

Design of Valve Regulated Lead-Acid Battery Charger Controller Integrated Circuit

High efficiency multi power source control constant current/constant voltage charger lithium-ion battery based on the buck converter

A Multistage Current Charging Method for Li-ion Battery Bank Considering Balance of Internal Consumption and Charging Speed

Battery Charger Controller IC Based on BCD Technology