Abstract:Random sequence adsorption algorithm, Python and ABAQUS joint simulation, preparation and precise prediction of micro mechanical properties of CF/PLA and SIC/PLA composites containing different volume contents of CF particles and SIC particles. At present, it exists the problems of poor computational accuracy of the micromechanical model and insufficient adaptive matching of the RVE unit cell model boundary conditions, being caused by the random distribution of particle size and quantity in particle composite materials. As for the above problems, the paper proposes a micromechanical model that uses a random sequence adsorption algorithm to deeply match and enhance the random distribution of particles, and a subroutine joint simulation method to generate boundary conditions quickly and automatically. The RVE unit cell model of particulate composites are numerically simulated at the micromechanical level. It was found that the enhancement of the mechanical properties of the base material by enhancing particles is highly consistent with the actual improvement value. The simulation values and actual values of particle composite materials with different volume contents are also accurately consistent. In addition, with the increase of particle volume content, its reinforcement effect on the base material first increases and then decreases, and there exists an optimal mixing ratio and a minimum mixing ratio. The optimal mixing ratio for short cut fiber reinforced particles is 50%, with a minimum mixing ratio of 10%. The optimal mixing ratio for silicon carbide reinforced particles is 40%, with a minimum mixing ratio of 8%. Through experimental results, it has been verified that the micromechanical model can quickly and accurately predict the elastic constants and Poisson's ratio of composite materials under periodic displacement boundary conditions, with a prediction accuracy of within 10%. Highlights Effectively solve the problems such as the random distribution of the size and quantity of reinforced particles in the particle composite material and the difficulty in adding the boundary conditions of the micro‐RVE unit cell model in the macro composite material. A random sequence adsorption algorithm is proposed to generate the RVE cell model with reinforced particles, and the periodic displacement boundary conditions are added to the RVE cell model through Python and Abaqus joint simulation. The simulation results show that the stress of chopped fiber reinforced particles is about 1.96 times that of the matrix material, and the stress of SiC reinforced particles is about 2.1 times that of the matrix material, and the optimal mixing ratio of chopped fiber reinforced particles is 50% and that of silicon carbide reinforced particles is 40%. The proposed micromechanical model can accurately predict the elastic constants of composites under periodic boundary conditions, and its prediction accuracy can be controlled within 10%. In this paper, a more reasonable meso‐stress‐strain field of single cell element is given, which can provide reference for studying the meso‐failure mechanism and nonlinear mechanical behavior of particle composites.

Microstructure-Based Computer Simulation And Mechanical Modeling Of Particle-Reinforced Composites

Micromechanical Simulation on Strength and Ductility of Two Kinds of Al-based Nanostructural Materials

Microstructure-based simulation on the mechanical behavior of particle reinforced metal matrix composites with varying particle characteristics

Deformation and fracture of SiCp/Al composites under complex loading conditions: A simulation study

Numerical simulation and experimental study on mesomechanics properties of particulate composites

Microstructure-Based Modeling of the Dynamic Behaviors of SiCp/7075Al Composites

Numerical Simulation of the Mechanical Properties and Fracture of SiCp/6061Al Composite Materials Based on Microstructure

Numerical simulation of microstructure for stir casting of Al-Si/SiC p composites with particle pushing model

Numerical simulation and quantitative assessment of particle distribution in SiC/Al-Si composites

3D microstructure simulation of stir casting SiCp/Al-7.0%Si composites

Plastic deformation and fracture behaviors in particle-reinforced aluminum composites: A numerical approach using an enhanced finite element model

Micromechanics of complex three-dimensional microstructures

3D multiscale tri-level finite element analysis of aluminum matrix composites with Nano&Micro hybrid inclusions

Micromechanical Analysis of SiC/Ti6Al4V Composite Under Complex Stress State

Monte carlo based strategy to simulate the microstructure evolution of the short-fiber reinforced metal matrix composites

Structural modeling and mechanical research of carbon nanotube reinforced aluminum matrix composites using strain gradient theory

Numerical Simulation of Microstructure of Al-Si/Sicp Composites During Stir Casting Process with Particle Pushing Model

Modeling and Simulation of Composite Materials

Numerical modeling and failure evolution of microstructure-based in-situ TiB2 and TiC+TiB2 reinforced Cu matrix composites

Experimental and Numerical Investigations of Tensile Properties of SiC Particle‐Reinforced Composites

An innovative computational framework for the analysis of complex mechanical behaviors of short fiber reinforced polymer composites