Abstract:In order to maximize density specific impulse of the Al/AP bipropellant powder rocket engine,the fire tests on Al/AP powder rocket engine were carried out with increasing the characteristic length of combustion chamber from 2.31 m to 12.62 m. Combustion performances of Al/AP mixtures such as ignition delay,burn time,combustion smoothness and intensity of vapor phase reaction in nitrogen under atmospheric pressure were studied by using spectrometer,CCD camera and CO2 laser igniter.Ap-parent packing densities of samples were measured.As an alternative fuel,the magnesium particles were also studied.The results show that,increasing chamber characteristic length from 2.31 m to 12.62 m produces smoother combustion with ±2.43% maxi-mum amplitude of chamber pressure oscillation.Flame of Al/AP mixture with 1μm Al particles is much more luminous than that with 10μm Al particles.And the continuous emission signal intensity of Al/AP mixture with 1μm Al particles at 568 nm exceeds the upper limit (65 000 counts)of the spectrometer,rather than Al/AP mixture with 10μm Al particles with continuous intervals among combustion process and lower emission signal intensity at 568nm of below 19 036 counts.Ignition delay and burn time of 10μm Al particles are 3.65 times and 3.03 times as 1μm Al particles,respectively.But the maximumRAlO and packing density are 14.3% and 21.3% less than 1μm Al powder,showing that smaller Al particles have better combustion performance but lower packing density.Although the theoretical specific impulse of the Mg/AP propellant is 95.6%of the Al/AP,its bulk density is 8%higher than 1μm Al powder,and the ignition delay is 90.3%shorter than 10μm particles.Flame images also show that magnesium can largely reduce the condensed phase deposition.

Calculation and Analysis on Energy Characteristics of Composite BAMO-THF Propellants

Influences of Plasticizers and Combustion Catalyst on Performance of Composite BAMO-THF Propellants

Enthalpy of Formation of P(bamo)‐b‐gap and Energetic Characteristics of Solid Propellants Based on the Copolymer

Application of P(BAMO-r-AMMO) in Propellant

Combustion of Composite Propargyl-Terminated Copolyether Propellant Containing Ammonium Dinitramide

Application of the BAMO‐AMMO Alternative Block Energetic Thermoplastic Elastomer in Composite Propellant

Performance of Powder Propellant Based on AP Pretreatment Technology

Effect of Nano Combustion Modifier on Combustion Properties of Db and Cmdb-Propellant

Molecular Dynamics Simulation of Binding Energies, Mechanical Properties and Energetic Performance of the Rdx/Bamo Propellant

Catalytic Thermal Decomposition and Combustion of Composite BAMO–THF Propellants

Energetic Characteristics Computation of Propellants Containing Hydrazinium 3,5-Diamino-1,2,4-triazole

Analysis on the Combustion Characteristics of Metal/AP Mixtures by Using Emission Spectroscopy

Research on the Combustion Properties of Propellants with Low Content of Nano Metal Powders

Study on Combustion Properties of Ammonium Dinitramide Composite Propellants

Molecular Dynamics Study of RDX/AMMO Propellant

Molecular dynamic simulation of performance of modified BAMO/AMMO copolymers and their effects on mechanical properties of energetic materials

The Energy and Pressure Exponent of Composite Modified Double‐base Propellant

Application of Al/B/Fe2O3 Nano Thermite in Composite Solid Propellant

Combustion of ammonium dinitramide based solid propellant with PBT as energetic binders

Combustion Properties of Composite Propellants Based on Two Kinds of Polyether Binders and Different Oxidizers

Analysis on Properties of Catalytic Combustion of Composite BAMO-THF Propellants