Abstract:Dissolution of UO2 is a prerequisite for the reprocessing of spent nuclear fuel. This study showed that UO2 could be directly dissolved in a single carboxyl-functionalized ionic liquid (IL), [HOOCMmim][Tf2N] 1-carboxymethyl-3-methylimidazolium bistriflimide, or [HOOCEtmim][Tf2N] 1-carboxyethyl-3-methylimidazolium bistriflimide. The addition of an extra Fe-containing IL, [Emim][FeCl4] (Emim, 1-ethyl-3-methylimidazolium) or [Bmim][FeCl4] (Bmim, 1-butyl-3-methylimidazolium) could significantly improve the dissolution kinetics. Results demonstrated that the dissolution process in the early stage could be described by using the pseudo first-order rate law. The apparent activation energy for UO2 dissolution in the mixture of the Fe-containing IL and carboxyl-functionalized IL was calculated to be ∼67 kJ mol-1, implying that the reaction was mainly controlled by a chemical process. Nevertheless, the influence of the diffusion process is non-negligible since the IL has a relatively high viscosity that can retard the diffusion of the formed uranyl species from the UO2 surface. Spectroscopic studies and density functional theory calculations indicated that the uranyl ion coordinated with carboxylate groups is the predominant product for UO2 dissolution in the single carboxyl-functionalized IL, while uranyl chloride complexes would also form in the mixed ILs. The dissolved uranyl species can be successfully recovered from the ILs by extraction. The success of UO2 dissolution in the carboxyl-functionalized IL with or without the Fe-containing IL indicates that the Fe-containing IL and oxygen can serve as an effective catalyst and oxidant for the dissolution of UO2, respectively.

Microwave-assisted dissolution of UO 2 with TBP-HNO 3 complex

Comparative Studies on the Dissolution of Ceramic UO2 Pellets in Nitric Acid by Microwave and Conventional Heating

Kinetics Study on the Dissolution of UO 2 Particles by Microwave and Conventional Heating in 4 Mol/l Nitric Acid

Studies on the dissolution kinetics of ceramic uranium dioxide particles in nitric acid by microwave heating

Treatment of UO2 Pellets Used for Preparing Fuel Elements of HTR-10 Followed by Supercritical Fluid Extraction

Uranium extraction from TRISO-coated fuel particles using supercritical CO2 containing tri-n-butyl phosphate

Dissolution Extraction of Uranium Oxides and Cerium Oxide with TBP-HNO3 Complex in Supercritical CO2

Enhancement of Uranium Recycling from Tailings Caused by the Microwave Irradiation-Induced Composite Oxidation of the Fe-Mn Binary System.

U3O8 Acid-Deficient Dissolution Process for Preparation of UO2 Kernels by Sol-Gel Method

Microwave-assisted preparation of Mn3O4@sepiolite nanocomposite for highly efficient removal of uranium

Conversion of Ceramic Uo2 Pellets for Htr-10 Fuel Elements into Nitrate with N2o4

Achieving Efficient Uranium Extraction by in Situ Ultrasonic Texturization of Commercial Fe Powder

Direct Dissolution of UO2in Carboxyl-Functionalized Ionic Liquids in the Presence or Absence of Fe-containing Ionic Liquids

Nitrate Conversion and Supercritical Fluid Extraction of Uo2-Ceo2 Solid Solution Prepared by an Electrolytic Reduction-Coprecipitation Method

Hydrothermal synthesis of UO2 nanoparticles and their formation mechanism

Highly Efficient And Selective Dissolution Separation Of Fission Products By An Ionic Liquid [Hbet][Tf2n]: A New Approach To Spent Nuclear Fuel Recycling

Preparation of Low-Temperature Sintered UO2 Nanomaterials by Radiolytic Reduction of Ammonium Uranyl Tricarbonate

Dissolution kinetics and thermodynamics of uranium from a boltwoodite ore for nuclear fuel cycle application

Study of Using ThO2-UO2 as Fuel in Nuclear Power

A Particularly Simple NH4Cl-based Method for the Dissolution of UO2 and Rare Earth Oxides in LiCl-KCl Melt under Air Atmosphere

Effect of Radiolysis and Radiolytic Products of Tri-Iso-amyl Phosphate on the Extraction Behavior of Uranium