Abstract:This study aims to understand the water retention capabilities of Superabsorbent Polymers (SAPs) in different alkaline environments for internal curing and to assess their impact on the rheological properties of cement paste. Therefore, the focus of this paper is on the absorption capacities of two different sizes of polyacrylic-based Superabsorbent Polymers : SAP A, with an average size of 28 μm, and SAP B, with an average size of 80 μm, in various solutions, such as pH 7, pH 11, pH 13, and cement filtrate solution (pH 13.73). Additionally, the study investigates the rheological properties of SAP-modified cement pastes, considering three different water-to-cement (w/c) ratios (0.4, 0.5, and 0.6) and four different dosages of SAPs (0.2%, 0.3%, 0.4%, and 0.5% by weight of cement). The results showed that the absorption capacity of SAP A was higher in all solutions compared to SAP B. However, both SAPs exhibited lower absorption capacity and early desorption in the cement filtrate solution. In contrast to the absorption results in pH 13 and cement filtrate solutions, the rheological properties, including plastic viscosity and yield stress, of the cement paste with a w/c ratio of 0.4 and 0.5, as well as both dry and wet (presoaked) SAPs, were higher than those of the cement paste without SAP, indicating continuous absorption by SAP. The viscosity and yield stress increased over time with increasing SAP dosage. However, in the mixes with a w/c ratio of 0.6, the values of plastic viscosity and yield stress were initially lower for the mixes with dry SAPs compared to the reference mix. Additionally, cement pastes containing wet SAP showed higher viscosity and yield stress compared to the pastes containing dry SAP.

INFLUENCE OF SUPER ABSORBENT POLYMER ON DIMENSION SHRINKAGE AND MECHANICAL PROPERTIES OF CEMENT MORTAR

The Influence of Nano-Silica Composite Superabsorbent Polymer on the Autogenous Shrinkage of Mortar

Influence of Superplasticizer Type and Dosage on Early-age Drying Shrinkage of Cement Paste with Consideration of Pore Size Distribution and Water Loss

Synthesis and Characterization of a New Super Absorbent Polymer (SAP) Via the Use of Low-Grade Kaolin Through Inverse Suspension Polymerization

Influence of Superplasticizers on Early Age Drying Shrinkage of Cement Paste with the Same Consistency

Hydration, Microstructure and Autogenous Shrinkage Behaviors of Cement Mortars by Addition of Superabsorbent Polymers

Effects of kaolin-modified superabsorbent polymers on mortar properties

Internal Relative Humidity, Autogenous Shrinkage, and Strength of Cement Mortar Modified with Superabsorbent Polymers

Impact of Superabsorbent Polymer on Shrinkage and Compressive Strength of Mortar and Concrete

Effect of superabsorbent polymer on mechanical properties of cement stabilized base and its mechanism

Experimental Study of a Superabsorbent Polymer Hydrogel in an Alkali Environment and Its Effects on the Mechanical and Shrinkage Properties of Cement Mortars

Influence of Super Absorbent Polymer on the Sulfate Resistance of Cement Mortar

Effect of Super-absorbent Polymer on Pore Structure of Hardened Cement Paste in High-strength Concrete

Research of Water Absorption and Release Mechanism of Superabsorbent Polymer in Cement Paste

Effect of superabsorbent polymers (SAPs) and fly ash on mechanical properties and microstructure of mortar

Study on the performance and synergistic mechanism of cement mortar reinforced with combined superabsorbent polymers and basalt fibers admixture

Investigating the Impact of Superabsorbent Polymer Sizes on Absorption and Cement Paste Rheology

Effect of Superabsorbent Polymer (SAP) Size on Microstructure and Compressive Strength of Concrete

Effect of hydrogel microcapsule on shrinkage and mechanical properties of cement mortars

Investigation of the Compressive Strength and Void Analysis of Cement Pastes with Superabsorbent Polymer

Influence of Superabsorbent Polymer in Self-Compacting Mortar