Development and application of cationic surfactant emulsified wax for use in aqueous drilling fluid

QIAN Dian-Cun,WANG Kui-Cai,YANG Hong,YANG Hai-Jun,FENG Jie,Lihui Wang,YUAN Xu-Bo

DOI: https://doi.org/10.19346/j.cnki.1000-4092.2009.03.002

2009-01-01

Abstract:A cationic surfactant emulsified wax, WPS, as multifunctional drilling fluid additive was prepared by a D phase emulsification process. The manufacturing procedure was presented. For this chemical, the fluorescence intensity was ≤ 0. 5 and the electrokinetic potential on dispersed droplet surfaces was > +50mV at pH ≤10. Its inhibitory capability was high as shown by shale cuttings recovery of 85. 3% and 22. 7% after being rolled at 150°C in 16 hrs in 2% WPS and 10% KCl solutions, respectively. 2% WPS treated 4% fresh water bentonite mud was tolerant to contamination by 6% WPS. The lubricating capacity of 2% WPS in a polymer/sulfonate salt water fluid, commonly used in Zhongyuan oil fields, was better than that of 2% black MMH product. The core permeability recovery determined in a core damage test with a well site fluid treated by 1% and 2% WPS raised from 84. 09% to 87. 03% and 90. 70%, respectively. 3 WPS polymer saturated salt water fluids, converted from a well site fluid, and their rheologic and filtration characteristics were presented in tables. This WPS driling fluid system was sucessfully used in drilling several tens wells in Zhongyuan, including wells of bottom temperature as high as 150°C and following results were noticeable: borehole enlargement of 12.4% in a test well; core permeability recovery in average of 87.7% and 82. 5% in static and dynamicc test, respectively; average daily oil output significantly increased as compared with the wells drilled with polymer/sulfonate fluids.