Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Prediction of Solids Dispersion Coefficient in Fluidized Bed Dense Zone Using CFD Simulation

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Dynamic Modelling of Fluidisation in Gas-Solid Bubbling Fluidised Beds

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Solids Mixing in the Bottom Zone of Fluidized Beds

Lateral dispersion coefficient of large solid particles in CFB dense zone using CPFD method

CFD–DEM Study of Mixing and Dispersion Behaviors of Solid Phase in a Bubbling Fluidized Bed

Simulation of the Lateral Movement on Particles Under Continuous Feeding and Discharging in a CFB Dense Zone

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Lateral Solids Dispersion Coefficient in Large-Scale Fluidized Beds

Micro-scale Simulation and Analysis of Gas-Solid Fluidized Bed with Multi-Density Distribution of Particles

Lateral Solids Mixing In The Dense Zone Of A Circulating Fluidized Bed

Discrete Element Study of Solid Circulating and Resident Behaviors in an Internally Circulating Fluidized Bed

CFD-DEM Simulation of Liquid-Solid Fluidized Bed with Dynamic Restitution Coefficient

CFD simulation on shear-thinning gas-liquid dispersion in coaxial mixer

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

Application of Cfd-Dem to the Study of Solid Exchange in A Dual-Leg Fluidized Bed

LES–DEM Investigation of the Solid Transportation Mechanism in a 3-D Bubbling Fluidized Bed. Part II: Solid Dispersion and Circulation Properties

Numerical study of solids behavior in fluidized bed with multi-immersed tubes

Liquid dispersion in gas-liquid-solid circulating fluidized beds