Abstract:To improve the waterflooding efficiency in the conglomerate reservoir with severe heterogeneity in the Xinjiang Oilfield, an in-situ starch grafted copolymerized gel (ISGCG) system as a strong plugging material was developed. Through viscosity experiment, rheological measurement, gel strength test, and sand pack plugging experiment, the gelation performance of the ISGCG system were systematically evaluated in the laboratory. Experimental results showed that the ISGCG system was a typical pseudoplastic fluid. It was also a shear-thinning fluid, which is beneficial to its pumping and deep propagation in the petroleum formation. In addition, with the increase of starch concentration, both the elastic modulus (G′) and viscous modulus (G″) of the gel system increased first and then decreased. When the concentration of starch reached 3 wt%, the viscoelasticity was the strongest. In addition, as the concentration of cross-linking agents increased, the gel strength also increased first and then decreased. However, the gelation time slightly changed. Moreover, with the increase of initiator concentration, the gelation time gradually reduced, but the gel strength did not change significantly. The ISGCG system had excellent injection performance in the conglomerate reservoir rocks since its viscosity was low. It also had a strong adhesion force with the reservoir sand after cross-linking, so the robust plugging strength during the secondary waterflooding process can be guaranteed. Last, the in-situ starch grafted copolymerized gel (ISGCG) has been successfully applied in a conglomerate reservoir in the Xinjiang Oilfield, China. After treatments of the ISGCG system, the daily water cut of the treated well reduced from 92.7% to a minimum of 75.8%, and the daily oil production increased from 8.1 to 18.8 t/d. It shows the ISGCG system is a promising material for conformance control and oil recovery improvement in conglomerate reservoirs.

Application of PAG to oilfield water injection system

Performance of Aspartic Acid-glutamic Acid Copolymer as Scale Inhibitor in Oilfield

JIN Zhiyuan1,2, SHAN Guorong2,3, PAN Pengju2,3

Application of a Salt-Resistant In Situ Cross-Linked Terpolymer Gel for the Daqing Oilfield

Biodegradable polysaccharide grafted polyacrylamide inhibitor for corrosion in CO2- saturated saline solution

Experimental Investigation of a Novel Nanocomposite Particle Gel for Water Shutoff Treatment in Mature Oilfields

EHL Properties of Polyalkylene Glycols and Their Aqueous Solutions

Compatibility of water treatment agents and produced water from oilfield

Development of degradable pre-formed particle gel (DPPG) as temporary plugging agent for petroleum drilling and production

Application of Inhibitive Polyglycol Drilling Fluid in Da'an Area

Experimental Study on Phenol-Formaldehyde Resin Aggregates as In-Depth Conformance Control Agents Stabilized by Polymer

Experimental Study of Oilfield Water Plugging with Organic Chromium Gel

APPLICATION PROGRESS OF INSITU POLYMER GEL IN OILFIELD CONFORMANCE CONTROL TREATMENT

Clearing Treatment of Polymer Containing Oilfield Produced Water by Using Coagulants/Flocculants

Study on the Performance Mechanism of Polyformaldehyde Glycol Ether Polymer for Crude Oil Recovery Enhancement.

Study on Biodegradability of Copolymer of Aspartic Acid and Glutamic Acid

Insights into the multiple applications of modified polyacrylamide as oilfield corrosion inhibitor and water phase tackifier

Evaluation of new hydrophobic association inorganic composite material as coagulant for oilfield wastewater treatment

Excellent coagulation performance of polysilicate aluminum ferric for treating oily wastewater from Daqing gasfield: Responses to polymer properties and coagulation mechanism

Development and Application of Polymer Plugging Remover for Polymer Injection Well in Changqing Oilfield

Development of in-situ starch grafted copolymerized gels for conglomerate reservoir conformance control and oil recovery improvement