Abstract:The systems responsible for mooring floating structures possess a pivotal function in ensuring safety. During harsh marine conditions, mooring systems can be susceptible to failure due to two key factors: mooring line snap tension and out-of-plane loading of the anchor. However, in contemporary mooring designs, these two factors do not receive sufficient contemplation. This paper recommends a safety design strategy for mooring system, which considers both the mooring line snap tension and the out-of-plane loading of the anchor. The analysis of partial mooring line breakage during extreme marine conditions is conducted to elicit insights into the characteristics of floating platform movement, variations in mooring line tension, and the implications of out-of-plane loading on the mooring anchor post breakage. The evolution process of the safety factor is deduced accordingly. The findings reveal that the tensions of adjacent lines experience an abrupt surge when a line is broken, leaving behind the possibility of progressive failure. Due to the vast drift of the floating platform, the adjacent anchors are also troubled by out-of-plane loadings, which dramatically reduce the anchor capacity. This indicates the coupling effect of the mooring line snap tension and the out-of-plane loading as the primary source of failure of the remaining mooring system. The paper emphasizes the significance of factoring in mooring line snap tension and anchor out-of-plane loading capacity verification in anchor design.

NARMAX Model Identification Application in Dynamic Analysis of a Mooring Line

Dynamic Analysis of Towed Cable with Variable Length During Turning Maneuvers

The Tension Identification of Short Hangers Based on Neural Network Algorithm and Additional Mass Method

Identification of Flexural Rigidity and Tension of Short Hangers with Adding Mass and Neural Network

Neural Network Control Approach of a Midwater Trawl System Based on Feedback Linearization

Quasi-Static Analysis Of The Multi-Component Mooring Line For Suction Anchors

Quasi-Static Analysis of the Multicomponent Mooring Line for Deeply Embedded Anchors

Experimental Investigation on Responses Characteristics of a Mooring Line with Imposed Top-End Motions

Quasi-static Analysis Model of Suction Caisson Mooring Line

Research on cable dynamic response of a catenary anchor leg mooring system based on ANCF

Nonlinear Identification for Control by Using NARMAX Models

Dynamic Response Analysis of the Equivalent Water Depth Truncated Point of the Catenary Mooring Line

NonSysId: A nonlinear system identification package with improved model term selection for NARMAX models

Investigations on the Mooring Safety Considering the Coupling Effect of the Mooring Line Snap Tension and Anchor Out-of-plane Loading

Quasi-static Three-Dimensional Analysis of Suction Anchor Mooring System

Modal Parameter Identification of Linear Time Invariant System under Non-stationary Ambient Excitation

Numerical Investigations on Load Transfer of Mooring Line Considering Chain–seabed Dynamic Interaction

Numerical Prediction of Potential 3-Dimensional Seabed Trench Profiles Considering Complex Motions of Mooring Line

Realtime prediction of dynamic mooring lines responses with LSTM neural network model

The dynamic response analysis of the equivalent water depth truncated point of the mooring line

A Comparative Study on System Identification Techniques for NARX Model