Pilot study on combined MBR-RO process for wastewater recovery

Bin Cao,Xia Huang,Kitanaka Atsushi,Yu fang Yang
DOI: https://doi.org/10.3321/j.issn:0250-3301.2008.04.012
2008-01-01
Abstract:The combined MBR-RO pilot system, using A2/O-MBR technology as a pre-treatment process, has been set up for the direct municipal wastewater treatment and recovery. The objective of this pilot study was to further investigate the feasibility of MBR system as a pretreatment process for RO permeation, estimate the MBR-RO process to produce high grade effluent, and evaluate the different pre-conditions affecting the RO permeability and bio-fouling. The results showed that the average RO permeate qualities were as TOC < 1.3 mg/L, NH4+ -N < 0.03 mg/L, TN < 0.1 mg/L and not detectable for TP, in terms of conductivity < 30 microS/cm and turbidity < 0.12 NTU, and complete inorganic irons rejection could be achieved with the lowest concentration, thus the grade of RO effluent could meet the drinking water standard. MBR technology was suitable as a pre-treatment process for RO in the MBR-RO process and thus no severe RO bio-fouling occurred during the whole study period of 6 months.
What problem does this paper attempt to address?