Abstract:Membrane fouling is the main bottleneck of the membrane bioreactor (MBR) and its widespread application. In this paper, a lab-scale submerged MBR treating synthesis wastewater was operated to examine the affecting mechanisms and correlation of soluble microbial products (SMP) with membrane fouling. A single-fiber microfiltration set-up was fabricated and applied to evaluate the importance of sludge properties of different sludges, including MLSS, EPS, SMP and their organic components, to the fouling evolution rate. It was revealed that MLSS, EPS and SMP all show positive correlation with the fouling rate (ΔTMP/Δm). However, the importance of SMP separated from MBR activated sludge (AS) to fouling rate (rp= 0.126) is rather lower than that of SMP in MBR cake sludge (CS) (rp=0.871). The protein and polysaccharide in CS-SMP, other than humic-like substances, were proved to be the major substances affecting fouling layer formation. Both the examination by fluorescence excitation emission matrix (EEM) and the observation under confocal laser scanning microscopy (CLSM) display that the SMP have to transform in the term of surface properties and size distribution with the development of membrane filtration. The AS-SMP has obvious protein-peak compared with MBR effluent, which implies that the protein is preferentially intercepted by membrane compared with other organic components. Whilst, after the membrane interception, the SMP in CS has a size as large as 100μm, which would facilitate the cake layer formation and hence is determinative for the fouling evolution. A comprehensive observation of fouled membrane surface with CLSM also demonstrates that there are two types of fouling layer on the membrane surface, i.e. cake-dominant and gel-dominant fouling layer, both of which are highly depend on the content of AS-SMP in SMBR. It was noted that the SMP in SMBR and cake sludge is the major foulant. The present work is valuable for understanding of the membrane fouling mechanisms and also for proposing the strategies for membrane fouling control in SMBR.

Effects of Soluble Microbial Product on the Performance of Submerged Membrane Bioreactor

Soluble Microbial Products in Membrane Bioreactor Operation: Behaviors, Characteristics, and Fouling Potential.

Effect of Soluble Microbial Products (SMP) and Its Transformation on Membrane Fouling in a Submerged Membrane Bioreactor (SMBR)

Characterization of Soluble Microbial Products in 10 Large-Scale Membrane Bioreactors for Municipal Wastewater Treatment in China

ADVANCES ON THE SOLUBLE MICROORGANISM PRODUCTS IN BIOLOGICAL WASTEWATER TREATMENT SYSTEM

Influence of Filamentous Microbes on Dissolved Organic Matters and Membrane Fouling in Membrane Bioreactor(MBR)

Impact of soluble microbial products on phosphorus removal of activated sludge in membrane bioreactor

Effects of Soluble Microbial Products (SMP) on the Performance of an Anammox Attached Film Expanded Bed (AAFEB) Reactor: Synergistic Interaction and Toxic Shock.

Identification of the Change in Fouling Potential of Soluble Microbial Products (SMP) in Membrane Bioreactor Coupled with Worm Reactor

Membrane Fouling Caused by Soluble Microbial Products in an Activated Sludge System under Starvation

Effects Of Micro-Organism Growth Phase On The Accumulation And Characteristics Of Soluble Microbial Products In Mbr

Fouling Potential Evaluation of Soluble Microbial Products (SMP) with Different Membrane Surfaces in a Hybrid Membrane Bioreactor Using Worm Reactor for Sludge Reduction

Characterization and Modeling of the Soluble Microbial Products in Membrane Bioreactor

The characteristic evolution of soluble microbial product and its effects on membrane fouling during the development of sponge membrane bioreactor coupled with fiber bundle anoxic bio-filter for treating saline wastewater.

The effect of solids retention times on the characterization of extracellular polymeric substances and soluble microbial products in a submerged membrane bioreactor.

Evaluation of soluble microbial products (SMP) on membrane fouling in membrane bioreactors (MBRs) at the fractional and overall level: a review

Influences of Sludge Retention Time on Sludge Properties and Membrane Fouling of Submerged Membrane Bioreactor with the Addition of Ca2+

Characteristics and Fouling Behaviors of Soluble Microbial Products and Sub-Visible Particles in an Anaerobic Membrane Bioreactor Treating Sewage at Room Temperature

Effects of intermittent aeration and oxygenation capacity in SBR process on soluble microbial products generation

Impact of microorganism metabolites on membrane fouling in membrane bioreactor

Effects of sludge retention time on sludge characteristics in membrane bioreactors