Abstract:Membrane fouling is the main bottleneck of the membrane bioreactor (MBR) and its widespread application. In this paper, a lab-scale submerged MBR treating synthesis wastewater was operated to examine the affecting mechanisms and correlation of soluble microbial products (SMP) with membrane fouling. A single-fiber microfiltration set-up was fabricated and applied to evaluate the importance of sludge properties of different sludges, including MLSS, EPS, SMP and their organic components, to the fouling evolution rate. It was revealed that MLSS, EPS and SMP all show positive correlation with the fouling rate (ΔTMP/Δm). However, the importance of SMP separated from MBR activated sludge (AS) to fouling rate (rp= 0.126) is rather lower than that of SMP in MBR cake sludge (CS) (rp=0.871). The protein and polysaccharide in CS-SMP, other than humic-like substances, were proved to be the major substances affecting fouling layer formation. Both the examination by fluorescence excitation emission matrix (EEM) and the observation under confocal laser scanning microscopy (CLSM) display that the SMP have to transform in the term of surface properties and size distribution with the development of membrane filtration. The AS-SMP has obvious protein-peak compared with MBR effluent, which implies that the protein is preferentially intercepted by membrane compared with other organic components. Whilst, after the membrane interception, the SMP in CS has a size as large as 100μm, which would facilitate the cake layer formation and hence is determinative for the fouling evolution. A comprehensive observation of fouled membrane surface with CLSM also demonstrates that there are two types of fouling layer on the membrane surface, i.e. cake-dominant and gel-dominant fouling layer, both of which are highly depend on the content of AS-SMP in SMBR. It was noted that the SMP in SMBR and cake sludge is the major foulant. The present work is valuable for understanding of the membrane fouling mechanisms and also for proposing the strategies for membrane fouling control in SMBR.

Fouling Potential Evaluation of Soluble Microbial Products (SMP) with Different Membrane Surfaces in a Hybrid Membrane Bioreactor Using Worm Reactor for Sludge Reduction

Identification of the Change in Fouling Potential of Soluble Microbial Products (SMP) in Membrane Bioreactor Coupled with Worm Reactor

Performance and Membrane Fouling of a Step-Fed Submerged Membrane Sequencing Batch Reactor Treating Swine Biogas Digestion Slurry

Effect of Soluble Microbial Products (SMP) and Its Transformation on Membrane Fouling in a Submerged Membrane Bioreactor (SMBR)

Soluble Microbial Products in Membrane Bioreactor Operation: Behaviors, Characteristics, and Fouling Potential.

Membrane Fouling Properties under Different Filtration Modes in a Submerged Membrane Bioreactor

Insights into Membrane Fouling of Submerged Membrane Bioreactors by Characterizing Different Fouling Layers Formed on Membrane Surfaces

Influence of Filamentous Microbes on Dissolved Organic Matters and Membrane Fouling in Membrane Bioreactor(MBR)

Assessment of SMP Fouling by Foulant–membrane Interaction Energy Analysis

Effective Control of Membrane Fouling by Filamentous Bacteria in a Submerged Membrane Bioreactor

Characteristics and Fouling Behaviors of Soluble Microbial Products and Sub-Visible Particles in an Anaerobic Membrane Bioreactor Treating Sewage at Room Temperature

Evaluation of soluble microbial products (SMP) on membrane fouling in membrane bioreactors (MBRs) at the fractional and overall level: a review

Effects of Soluble Microbial Product on the Performance of Submerged Membrane Bioreactor

Relationship Between Sludge Characteristics and Membrane Flux Determination in Submerged Membrane Bioreactors

Effects of biopolymer discharge from MBR mixture on sludge characteristics and membrane fouling

Sludge rheological and physiological characteristics in a pilot-scale submerged membrane bioreactor

Interaction Energy Evaluation of Soluble Microbial Products (SMP) on Different Membrane Surfaces: Role of the Reconstructed Membrane Topology

A Systematic Insight into Fouling Propensity of Soluble Microbial Products in Membrane Bioreactors Based on Hydrophobic Interaction and Size Exclusion

Membrane Fouling in a Submerged Membrane Bioreactor (MBR) under Sub-Critical Flux Operation : Membrane Foulant and Gel Layer Characterization

[Membrane Surface Fouling Properties in MBRs for High-Salinity Wastewater Treatment].

Fouling Behaviours of Two Membranes in a Submerged Membrane Bioreactor for Municipal Wastewater Treatment