Abstract:Phase change emulsions are promising thermal fluids, but have been frustrated by high degrees of supercooling. The existing methods for supercooling reduction involve the addition of various nucleating agents (NAs) but have achieved limited success due to the lack of commonality and the negative impact on emulsion stability. This study explored a strategy by integrating interface-induced and NA-induced nucleation. A diblock copolymer was positioned at the interface and a new NA, polyethylene, was efficiently embedded into the droplets assisted by ultrasonication to minimize supercooling and extend stability. Firstly, hexadecane emulsion was chosen for assessment of the chemical compositions and ultrasonication conditions. A higher ultrasound intensity facilitated the polyethylene embedment, providing sufficient nucleation sites within the droplets with a low mass content (1 %). The functionality of polyethylene was found to be size-dependent, resulting in a single melting/freezing peak and a low supercooling degree ( ΔT ) of 3.7 °C for hexadecane droplets of 256.3 nm average diameter. Subsequently, the effectiveness of polyethylene was evaluated on other seven paraffin emulsions with higher melting points ( T m ), achieving minimal supercooling ( ΔT = 0.2–2.6 °C). Furthermore, dynamic stability was evaluated by applying an emulsion template ( T m ≈ 54 °C) to a rig for long period and repeated thermal cycles (6 months and 9000 cycles). The average diameter increased marginally from 374.1 to 393.4 nm, while the ΔT remained stable at 2.5 °C, and the latent heat slightly decreased. No obvious sign of emulsion breakdown was observed during an additional six-month storage period. An effective strategy has been developed for formulating a range of novel phase change emulsions with extended service life and minimal supercooling which are desirable for thermal energy storage applications.

Study progress in and wax emulsion as heat storage media its application

Preparation, Property and Application of Phase Change Material Emulsions

Improvement of Thermal Performance of Novel Heat Exchanger with Latent Heat Storage

Progress on paraffin emulsion in field of latent heat transportation

Preparation and Properties of Paraffin /LDPE /OMMT /graphite Phase Change Composite for Thermal Energy Storage

STUDY ON CHARGING AND DISCHARGING RATES OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS EMPLOYING MULTIPLE PHASE CHANGE MATERIALS

Preparation and Characterization of Phase Change Microcapsule Emulsion for Thermal Energy Storage and Transportation

Research Based on Nanoparticles/Phase Change Wax Emulsion

Thermophysical properties and thermal characteristics of phase change emulsion for thermal energy storage media

Development and thermal characteristics of phase change nanoemulsions for low-temperature thermal energy storage

The Thermal Performance of A Novel Phase Change Emulsion

Heat transfer performance of a phase-change material in a rectangular shell-tube energy storage tank

Progress in Phase Change Nano-Emulsions for Energy Applications-a Concise Review

Preparation and flow characteristic of a novel phase change fluid for latent heat transfer

Developing novel high-performance polyethylene-embedded phase change emulsions with minimal supercooling for efficient thermal energy storage

Experimental Investigations on Flow and Heat Transfer Performances of Paraffin/Water Emulsions Flowing Through a Plate Heat Exchanger

Experimental study on heat capacity of paraffin/water phase change emulsion

Advances in solid-liquid phase change processes of nanocomposite phase change materials for thermal energy storage

Solid/liquid phase change heat transfer in latent heat thermal energy storage

Experimental Study on Paraffin Wax and Soya Wax Supported by High-Density Polyethylene and Loaded with Nano-Additives for Thermal Energy Storage

Basic Physics and In-tube Resistances of Novel Phase Change Fluids