Experimental Study on Improvement of Air-dilution Combustion Performance of Methanol Engine by Adjusting Intake Guide Flappers, Exhaust Variable Valve Timing and Split Injection
Wang Xiangyang,Liu Yu,Li Xiaoping,Xie Fangxi,Jiang Beiping
DOI: https://doi.org/10.1016/j.energy.2024.133825
IF: 9
2024-01-01
Energy
Abstract:This study investigates the effects of adjusting intake guide flappers, EVVT, and split injection on the performance of a four-cylinder, four-stroke methanol direct-injection engine. The results show that installing the optimal transverse flapper 4 and longitudinal flapper 5 leads to a reduction in CA5-IG and CA90-CA10, an advance in CA50, a decrease in CO and HC emissions, and an increase in NOx emissions. After optimizing the ignition timing, the BSFC can be reduced by 1.5%. Installing the optimal flappers enhances the reduction in BSFC and mitigates the increase in COVIMEP caused by delayed EVVT. With the installation of the normal flapper, flappers 4 and 5, the lowest BSFC occurs at an EVVT of -10°CA. Meanwhile, BSFC is reduced by 1.1%, 1.5%, and 2.0% compared to -25°CA, while COVIMEP increases by 48.8%, 36.2%, and 13.9%. Installing the optimal flappers enhances the improvement of split injection on combustion performance, fuel economy, and cyclic variation. With the installation of the normal flapper, flappers 4 and 5, the lowest BSFC and COVIMEP occurs at the second injection ratio of 10%. Meanwhile, compared to single injection, BSFC decreases by 0.2%, 0.9%, and 0.6%, while COVIMEP decreases by 18.5%, 32.6%, and 31.9%.