Abstract:In this study, we use discrete dislocation dynamics (DDD) simulation to investigate the effect of heterogeneous dislocation density on the transition between quasi-elastic deformation and plastic flow in face-centered cubic single crystals. By analyzing the stress-strain curves of samples with an initial, axial dislocation density gradient, we arrive at the following conclusions: (i) in the regime of quasi-elastic deformation before the onset of plastic flow, the effective elastic modulus of the simulated samples falls significantly below the value for a dislocation-free crystal. This modulus reduction increases with decreasing dislocation density gradient: crystals with homogeneous dislocation distribution are thus weakest in the quasi-elastic regime; (ii) the transition towards plastic flow occurs first in regions of reduced dislocation density. Therefore, the overall yield stress decreases with increasing dislocation density gradient; (iii) crystals with dislocation density gradient exhibit a more pronounced hardening stage during which stress is re-distributed onto stronger regions with higher dislocation density until the sample flows at a constant flow stress that is approximately independent on dislocation density gradient. We interpret these findings in terms of a continuum dislocation dynamics inspired model of dislocation density evolution that accounts for inversive dislocation motions. The transition between quasi-elastic and plastic deformation is interpreted as a transition from inversive to non-inversive dislocation motion, and the initial differences in elastic modulus are related to a density dependent polarizability of the dislocation system. The subsequent plastic flow behavior is analyzed in terms of a modified version of Mughrabi's composite model.

Origin of Substantial Plastic Deformation in Gum Metals

Inclination-governed Deformation of Dislocation-Type Grain Boundaries

High Strain Gradient Plasticity Associated with Wedge Indentation into Face-Centered Cubic Single Crystals: Geometrically Necessary Dislocation Densities

The Deformation Mechanism in Cold-Welded Gold Nanowires Due to Dislocation Emission

Machine learning atomic dynamics to unfold the origin of plasticity in metallic glasses: From thermo- to acousto-plastic flow

Dislocation Structures In Deformed Metals

3D Microstructural and Strain Evolution During the Early Stages of Tensile Deformation

Evolution of deformation mechanisms and their orientation dependence in fine-grained Mg-3Gd during tension

Deformation behaviors in light of dislocation core characteristics with respect to the compositional-dependent misfit potentials of aluminum alloys

Microplasticity and yielding in crystals with heterogeneous dislocation distribution

Resolving localized geometrically necessary dislocation densities in Al-Mg polycrystal via in situ EBSD

Local Deformation Mechanisms in Metal Systems with a Tailored Grain Size Distribution

The Grain Size and Orientation Dependence of Geometrically Necessary Dislocations in Polycrystalline Aluminum During Monotonic Deformation: Relationship to Mechanical Behavior

Operating slip modes and inhomogeneous plastic deformation of Mg-10Gd-3Y-0.5Zr alloy during compression

Role of and dislocations on the room-temperature grain boundary migration in a deformed Mg alloy

Grain size and orientation affected deformation inhomogeneity and local damage of hot-deformed Al-Zn-Mg alloy

Irreversible evolution of dislocation pile-ups during cyclic microcantilever bending

Topology and Evolution of Dislocation Structures Mediated by Glissile Reactions in Face-Centered Cubic Metals

Dislocation Depleted Deformation in Nano-Grained Metals

Non-localized deformation in metallic alloys with amorphous structure