Numerical Simulation of Flow and Heat Transfer Phenomenon of Helical Cruciform Fuel Assembly under Subcooled Boiling
Qi Zhang,Haoyu Wang,Junlong Li,Chenxi Li,Feipeng Qi,Yi Zhou,Hanyang Gu,Tenglong Cong,Yao Xiao
DOI: https://doi.org/10.1016/j.pnucene.2024.105349
IF: 2.461
2024-01-01
Progress in Nuclear Energy
Abstract:The helical cruciform fuel (HCF) is designed with the functional and structural integration concept. The function of the conventional spacer grid is replaced by the spiral structures while they are the components of the HCF element. The HCF is an optional design for the new generation of nuclear reactors. In the present work, the subcooled boiling in the 4 x 4 HCF assembly is investigated based on the Eulerian multiphase model and auxiliary models for interphase exchanges. The averaged and localized distributions for the transverse flow, vapor fraction and wall temperature are analyzed, which is of great importance for the reactor safety design. The vapor phase is mainly generated from the elbow, and it flows towards the leeside of the blade. With low quality, the nucleation boiling merely occurs near the elbow and the heat transfer of the fuel assembly is mainly affected by the forced convection. The temperature difference between the blade parts and the elbow parts is over 23.0 degrees C with the quality of -0.278. The temperature difference between the elbow and the rest part of HCF element gradually decreases by increasing the quality of coolant. The azimuthal wall temperature is almost the same with the quality larger than -0.156, and the temperature difference is less than 0.5 degrees C. Meanwhile, the effect of twisted angle on the heat transfer of HCF assembly is negligible with larger quality. The Papell correlation provides good prediction accuracy for the current simulation results. A new correlation that has higher prediction accuracy is established, which is applicable effective when P = 15.5 MPa, G = 1.30 x 10(3)similar to 5.86 x 10(3) kg/(m(2)s), q = 2.29 x 10(2)similar to 1.37 x 10(3) kW/m(2), x = -0.278 similar to 0. The new correlation may be applied in the thermal-hydraulic analysis of the HCF assembly.