Abstract:The engineering of high-energy lasers for applications such as the AirBorne Laser (ABL) system requires optical windows capable of handling megajoule pulse energies. The selection and/or evaluation of a suitable window material involves considerations relating to thermal lensing, i.e., the beam distortion caused by thermally induced phase aberrations, in addition to issues arising from the thermal stresses generated by beam-induced temperature gradients. We document analytical methods for evaluating the impact of beam-induced optical distortions and beam-induced mechanical stresses, which may enable the designer to properly assess the performance of window-material candidates. We illustrate the procedure in the light of an evaluation of the performance of the leading candidate for operation in the near-infrared, i.e., fused silica (SiO2). In terms of allowable peak intensities, and based on available material properties, the limiting factor is seen to be related to shear stresses generated by coating-induced axial compression that may lead to plastic deformation. The allowable beam fluence is controlled by thermally induced phase distortions rather than planar or axial stresses, thus reflecting the unusually small αE∕χ ratio of fused SiO2, where αE represents the thermal stress factor, and χ designates the optical distortion coefficient. In conjunction with an evaluation of the required window thickness as a function of the diameter, our analysis leads to the conclusion that operating the ABL system at the projected power level (2MW) and pulse duration (5s) requires bulk windows—if made of fused SiO2—of at least 20cm in diameter but no more than 7.5mm in thickness.

Materials for large-scale athermal laser window and evaluation of their performance

Design and Comparison of Laser Windows for High-Power Lasers

High-energy laser windows: case of fused silica

Comparison Of Fused Silica And Oxyfluoride Glass On Laser Induced Initial Damage Morphology

Preparation Of The Oxyfluoride Glass With High 3 Omega Laser Induced Damage Threshold

Calculation of Thermal and Mechanical Effect Induced by Laser in Optical Window Materials

Fundamental-frequency-absorbed Oxyfluoride Glass in a High-Power Laser

Transmissivity Testing of Calcium Fluoride Windows under High Pulse Repetition Rate Laser Irradiation at 193Nm

Numerical Analysis of the Thermal and Mechanical Effects of Laser Windows of a High-Power All-Solid-state 2-Μm Laser System

High Water-Resistant and Thermal Stable Fluoride Fibers for Mid-Infrared Laser

ArF laser-induced damage of calcium fluoride windows with protected anti-reflection coatings

High Temperature Thermal Behaviour Modeling of Large-Scale Fused Silica Optics for Laser Facility

Phase‐Separation Engineering of Glass for Drastic Enhancement of Upconversion Luminescence

The Influence of Window Thermal Conductivity on the Temperature Distribution of the Adp Crystal with Large Aperture

Effect of Introducing KNO3 on the Preparation of Athermal Fluorophosphate Glass and Investigation on Its Thermo-Optical Property

Quantitative prediction of the glass-forming region and luminescence properties in Tm3+-doped germanate laser glasses

SiO2/HfO2 Laser Film with Enhanced Protection and Antireflection for Sapphire Infrared Windows at High Temperatures

Comparative Study of Plasma-Enhanced-Atomic-Layer-Deposited Al 2 O 3 /HfO 2 /SiO 2 and HfO 2 /Al 2 O 3 /SiO 2 Trilayers for Ultraviolet Laser Applications

Exploring Long-Wave Infrared Transmitting Materials with A(X)B(Y) Form: First-Principles Gene-Like Studies

Characterization of Morphology and Mechanical Properties of Glass Interior Irradiated by Femtosecond Laser

Numerical Simulations of the Influence on the Temperature Fields of Large-Sized Nd-Glass Slab with Designed Edge-Cladding Materials, Methods, and Structures