Abstract:Microforming using a small machine (or so-called desktop machine) is an alternative new approach to those using full-size heavy equipment for manufacturing microparts. Microparts are commonly defined as parts or structures with at least two dimensions in the submillimeter range, which are used extensively in electronics and micromechanical products. However, when scaling down a conventional forming process to microscale, the influence of the so-called size effect needs to be considered. The individual microstructure (size, shape, and orientation of grains) and the interfacial conditions show a significant effect on the process characteristics. In this paper, the process of extrusion is investigated to establish it as a viable process for microforming. A forming assembly is fabricated and used in conjunction with a loading substage to extrude micropins with a final diameter of 1 mm. The effect of grain size is investigated by using workpieces heat treated to produce grain sizes varying from 32 μm up to 211 μm. Two extrusion dies with different roughness are used to study the effect of surface finish. While experiments lead to interesting questions and new discoveries, theoretical or numerical solutions are necessary tools for process optimization. Here, knowing the limits of the current widely used numerical simulation tools [i.e., the Finite Element Method (FEM)], a new method, the Reproducing Kernel Element Method (RKEM), has recently been developed to address the limitations of the FEM (for example, remeshing issue), while maintaining FEM’s advantages, e.g., the polynomial reproducing property and function interpolation property. The new RKEM method is used to simulate the microextrusion problem. Its results are compared with that obtained from the FEM and the experiment result. Satisfactory results were obtained. Future directions on the experimental and simulation work are addressed.

Research on Microforming by Extrusion Test

Study on Micro Scale Extrusion Forging Process

On the Size Effects in Micro/meso Semisolid Extrusion–forging of A356 Aluminum Alloy

Study on Inhomogeneous Material Flow in Microforming

Research On Micro-Forming Process Of Aluminum And Its Alloy

Experimental and numerical study on the micro-forming of copper multi-crystal

Grain size effect on the assembly quality of micro-scaled barrel formed by microforming

Influence of Grain Size and Temperature on Micro Upsetting of Copper

Study on Relationship Between Material Plasticity and Geometrical Dimensions

Experimental and Numerical Study of Micro Deep Drawing of Copper Single Crystal

Research on Micro Forming of the Micro-triangle Parts

Effect of Grain Size and Specimen Dimensions on Micro-Forming of High Purity Aluminum

Experimental study on isothermal micro-extrusion of ZL101 alloy

Study on the Size Effect and the Effect of the Friction Coefficient on the Micro-extrusion Process

Experimental Study on Micro Hot Embossing Technology of Zr-based Amorphous Alloy

Experimental Study on Effect of Thermal Deformation Parameters on Forming Process of Microgears

Effects of Extrusion Process on Microstructure of Aluminum Profiles with Different Wall Thickness Sections

Taguchi Experimenting Study on Semi-solid Alloy ZL101 for Thixo-forming and Micro-forward-extrusion

Hot micro-extrusion experimentation and die design

Microforming: Experimental Investigation of the Extrusion Process for Micropins and Its Numerical Simulation Using Rkem

Surface Topography and Microstructure Analysis in Micro Forward Extrusion Parts of T2 Copper