Effect of thermal treatments on the reactivity of nanosized calcium phosphate powders

Marc Bohner,Tobias J. Brunner,Ruikang Tang,Wendelin Jan Stark.

2008-01-01

Abstract:null

What problem does this paper attempt to address?

Effect of Thermal Treatments on the Reactivity of Nanosized Tricalcium Phosphate Powders

Marc Bohner,Tobias J. Brunner,Nicola Doebelin,Ruikang Tang,Wendelin J. Stark

DOI: https://doi.org/10.1039/b804314k

2008-01-01

Journal of Materials Chemistry

Abstract:This study had two aims: (i) to determine the effects of calcination temperature on the hydraulic reactivity of three nanosized X-ray amorphous tricalcium phosphate (ATCP) powders, and (ii) to try to bring a better understanding of the poor reactivity of a-tricalcium phosphate (alpha-TCP) nanoparticles obtained by calcining ATCP powders. For those purposes, five calcination temperatures were selected in the range of 500 to 800 degrees C. Calcination led to the formation of powders consisting of ATCP (500 degrees C), alpha-TCP (600, 650 and 700 degrees C) and beta-tricalcium phosphate (beta-TCP; 700 and 800 degrees C). The powder reactivity was assessed by mixing 0.2 g of powder and 1 mL Na(2)HPO(4) 0.2 M solution in an isothermal calorimeter. The total reaction time was a function of the calcination temperature: from a few minutes for ATCP powders and ATCP powder calcined at 500 degrees C, it increased to several hours for ATCP powder calcined at 600, 650 and 700 degrees C. Interestingly, this change of reaction time was mostly due to an increase of the so-called induction time, i.e. time to start the reaction. It increased from a few seconds to a few hours. Strikingly, the induction time and the total reaction time were reduced by an increase of the calcination temperature from 650 to 700 degrees C. The results were attributed to the formation of a defect-free surface upon calcination and the concomitant difficulty in creating surface defects to allow dissolution and hence reaction.
The Effect of Annealing on Microstructure and High Temperature Erosion Property of Arc-Spraying Coatings Containing Nanosized Ceramic Powders

LIU Shao-guang,WU Jin-ming,ZHANG Sheng-cai,RONG Shu-jie,HU Xiao-hai,LI Zhi-zhang

DOI: https://doi.org/10.3321/j.issn:1001-9731.2006.12.049

2006-01-01

Journal of Functional Biomaterials

Abstract:A composite coating containing nanosized ceramic powders was fabricated by a supersonic arc-spraying procedure using corresponding cored wires.The microstructure and high temperature erosion property of the coating were studied by characterizations with optical microscope,microhardness,X-ray diffraction,scanning electron microscopy and transmission electron microscopy,with special attentions paid to the effect of the subsequent annealing treatment.The results show that the skin and the cored powders melted and fused to form homogeneous solid solutions during the arc-spraying procedure using the cored wires.The achieved coating shows homogeneous hardness.The subsequent annealing of the coating reduced defects and residual stress,decomposed the metastable phases and at the same time improved the crystallinity of corresponding phases in the coating,which in turn improved its hardness.The high-temperature erosion resistance of the coatings after the subsequent annealing improved significantly.
The Effect of Calcination Temperature on the Structure and Performance of Nanocrystalline Mayenite Powders

Katarzyna Berent,Sebastian Komarek,Radosław Lach,Waldemar Pyda

DOI: https://doi.org/10.3390/ma12213476

IF: 3.4

2019-10-24

Materials

Abstract:The effect of calcination temperature on the structural properties and phase formation of synthesized CaO-Al2O3 nanopowder was investigated and discussed. The calcination products were identified by differential thermal analysis (DTA) and the crystalline phase formation was analyzed by X-ray diffraction (XRD). The obtained results showed that the crystallization started at 460 °C. Finally, the microstructures of the nanoparticles were observed by scanning (SEM) and transmission electron (TEM) microscopes. The investigation showed that an increase in the calcination temperature led to the appreciable increase in the crystallite size and the crystallinity of the final product. The obtained data confirmed that the prepared materials were mayenite with different surface area in the range of 71.18 m2/g to 10.34 m2/g after annealing in the temperature range of 470 °C to 960 °C.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Effects of the coating process on nanoscale Y2O3:Eu3+ powders

Qiang Li,Lian Gao,Dongsheng Yan

IF: 10.508

1999-01-01

Chemistry of Materials

Abstract:null
Effect of Heat Treatment of Nano-Hydroxyapatite Coatings Prepared Using Electrohydrodynamic Deposition

Xiang Li,Jie Huang,Mohan Edirisinghe,Garrit Koller,Lucy Di Silvio,Tara Renton,Minoo Esat,William Bonfield

DOI: https://doi.org/10.1504/ijnbm.2009.028338

2009-01-01

International Journal of Nano and Biomaterials

Abstract:Electrohydrodynamic spraying has recently emerged as a powerful method of producing nano-structured hydroxyapatite (nHA) coatings for biomedical implants. To enhance the mechanical properties of these coatings, a subsequent heat treatment is normally needed. However, whether this process significantly influences the coated surface morphology and cellular responses still needs to be systematically studied and documented. In this investigation, the morphology, composition and resultant surface roughness of the nHA coating surfaces were examined, prior to in vitro cytocompatibility, proliferation and cell morphological assessments using primary alveolar human osteoblast-like (aHOB) cells. After heat treatment of nHA coatings prepared using electrohydrodynamic spraying, it was found that the coated surface roughness reduced from a pre heat treated average of 4.2 μm to a post heat treated roughness of 2.9 μm, 2.5 μm and 2.1 μm at 500°C, 700°C and 900°C, respectively. The in vitro study determined a favourable osteoblast response to all substrates examined, with no statistical difference between the samples examined, as determined by the AlamarBlue proliferation assay over 21 days in culture. Confocal microscopy and scanning electron microscopy further demonstrated cell proliferation and adhesive adaptation on the experimental substrates.
Heat Treatment During Preparation of Nano-zirconia Powders by the Liquid-phase Process

艾德生,李庆丰,袁伟,戴遐明

DOI: https://doi.org/10.3321/j.issn:1009-606x.2002.04.010

2002-01-01

Abstract:Nano-ZrO2 powders were prepared by the modified precipitate method under various heating treatment conditions. TEM, SAXS, BET and XRD analyses indicated that the influence of heat treatment on the performance of nano-ZrO2 is notable. Combining the experimental results and theoretical analysis, the mechanism of particles?growth and aggregation, and the effect of heat treatment upon the change of composition, granularity and microstructure were proposed.
The Effect of Nanoparticles on the Properties of Calcium Aluminate Cement Pastes at High Temperatures

Chaohua Jiang,Huiwen Yuan,Chunhua Lu,Zhongzi Xu,Duyou Lu

DOI: https://doi.org/10.1680/jadcr.17.00039

IF: 2.2061

2018-01-01

Advances in Cement Research

Abstract:Heated cementitious pastes could be used as thermal energy storage materials. The effects of nano-silica, nano-magnesia and nano-zirconia on the evolution of the mechanical and thermal properties of calcium aluminate cement (CAC) pastes at three temperatures (105, 350 and 900°C) were investigated. At 105°C, the addition of nano-zirconia resulted in better residual compressive strength than those of the pastes with the other nanoparticles. The improvement in thermal properties of the pastes with added nanoparticles was mainly at temperatures of 350°C and 900°C. The main reason for the difference of properties is that the incorporation of nanoparticles accelerates the forming process of the solid phase according to calorimetric analysis. The microstructure of the pastes was also found to be affected by the nanoparticles. X-ray diffraction and thermogravimetry analyses were conducted to investigate the phases and the mass changes, respectively. The experimental results show such nanoparticle optimisation would enable the development of novel forms of functional CAC materials for use at high temperature.
Effects of Nanoparticle Treatment on the Crystallization Behavior and Mechanical Properties of Polypropylene/calcium Carbonate Nanocomposites

Weitao Wan,Demei Yu,Yunchuan Xie,Xiusheng Guo,Wandi Zhou,Jiping Cao

DOI: https://doi.org/10.1002/app.24561

IF: 3

2006-01-01

Journal of Applied Polymer Science

Abstract:Effects of nanoparticle surface treatment on the crystallization behavior and mechanical properties of polypropylene (PP)/CaCO3 nanocomposites were investigated by using differential scanning calorimetry (DSC), polarized optical microscope (POM), X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The results demonstrated that the interfacial interaction formed between PP and nanoparticles significantly influenced the thermal and mechanical properties of nanocomposites. It was found that CaCO3 nanoparticles modified by a single aluminate coupling agent (CA-1) could improve the onset crystallization temperature more effectively than that modified by a compound surface-treating agent (CA-2) could. However, there is no significant difference in total rate of crystallization for the two PP/CaCO3 nanocomposites (PPC-1 and PPC-2), which contained CA-1 and CA-2, respectively. In contrast, CA-2 modified nanoparticles could cause smaller spherulites and induce much more beta-phase crystal in nanocomposites than that of CA-1 modified nanoparticles. This may be explained by a synergistic effect of aluminate coupling agent and stearic acid in CA-2, which also resulted in an improved toughness for PPC-2. (c) 2006 Wiley Periodicals, Inc.
Effect of Ca/P Molar Ratio and Heat Treatment on Thermal Decomposition and Reconstitution of Hydroxyapatite

Qingxia Zhu,Ming Lv,Jianqing Wu

DOI: https://doi.org/10.4028/www.scientific.net/kem.330-332.107

2007-01-01

Key Engineering Materials

Abstract:Stability of hydroxyapatite(HA) structure is influenced by preparation conditions and afterwards heat treatment. In this paper, the powders with different Ca/P molar ratio were calcined to investigate the influence of Ca/P and heat treatment on thermal decomposition and reconstitution of HA. The results show that the Ca/P has little change even calcined at a high temperature of 1500°C. The Ca/P molar ratio close to 1.67 is beneficial to form high purity HA. HA gradually releases its OH- ions in the temperature range of 800-1200°C. The decomposition takes place at about 1200°C and will become more and more severe with the increase of temperature. Cooling with slow rate and post-heat treatment in wet atmosphere are beneficial to both the rehydration and the recovery of HA from the decomposition products (TTCP and α-TCP).
Effect of thermal treatment on the structural, morphological, and chemical properties of apatite bioceramicsmaterials

N. E. Ghamri,O. K. Kribaa,L. Zenkhri,H. Djouama,,,,

DOI: https://doi.org/10.15251/djnb.2023.182.531

2023-05-01

Digest Journal of Nanomaterials and Biostructures

Abstract:Monitoring the synthesis conditions of apatite phosphate by double decomposition seems very useful in view of the simplicity and rapidity of this method. This work is mainly based on production of apatite in the laboratory by the double decomposition method, HAP and TCP were synthesized and studied to demonstrate the influence of thermal treatment and synthesis temperature on the structure of apatite powders. The prepared samples were calcined at 900°C and sintered at 1050, 1100 and 1150°C. The effect of synthesis and sintering temperature on the structure of this material was investigated using XRD, FTIR, and SEM-EDX. This study confirmed that calcination has no effect on the HAP phase stability elaborated. Therefore,for TCP synthesized: β-TCP is the most phase that persists up to, 91% and a minimal partial transformation into Dicalcium Diphosphate is recorded. FTIR spectrum affirms the persistence of OH– and PO43- group bands suggestingthe basic apatite structure for HAP and TCP of the sample, calcination, leads to the crystallization of TCP Ca3(PO4)2. However, the calcined precipitate contains β calcium pyrophosphate Ca2P2O7, and HA:Ca10(PO4)6(OH) 2 constitutes secondary phase. While the calcination of HAP did not affect it. SEM micrograph of synthetic HAP powder treated at 1050°C revealed particle morphology with the dense and cloudy surface while TCP micrograph powder treated at the same temperature shows particle morphology of porous and smoother surfaces and irregular spherical shape. In conclusion thethermal treatments improve the performance of the bioceramic residueand have the potential to create a new type of sustainable and bio-friendly material. Hydroxyapatite and tricalcium phosphate likeotherrelated calcium phosphate minerals, have been used extensively as orthopedic implant material due to their excellent biocompatibility and bone bonding to its structural and composition alsimilarity to that of mineral phase of hard tissue in human bones.

materials science, multidisciplinary,nanoscience & nanotechnology
Effect of particle grading on fracture behavior and thermal shock resistance of MgO-C refractories

Xiaofeng Xu,Tianbin Zhu,Yawei Li,Yajie Dai,Mithun Nath,Yicheng Ye,Nanyan Hu,Yuanjin Li,Xuyuan Wang

DOI: https://doi.org/10.1016/j.jeurceramsoc.2021.10.037

IF: 5.7

2022-02-01

Journal of the European Ceramic Society

Abstract:Two types of MgO-C refractories with tight particle grading and non-tight particle grading were prepared according to Andreasen's continuous packing theory. Fracture behaviors were investigated using wedge splitting tests combined with digital image correlation method and acoustic emission techniques. The results indicated that MgO-C refractory with non-tight particle grading treated at 1400 ℃ had more in situ phases (e.g., AlN and MgAl2O4) and exhibited less brittleness than specimens with tight particle grading even though they had similar nominal tensile strengths. In contrast, specimens with non-tight particle grading had greater horizontal strain under various loading stages, reflecting their better ability to resist rupture deformation. In addition, more microcracks were initiated earlier in the pre-peak region, and more energy was consumed. The decrease in coarse particles and corresponding increase in fine powder content increased the interface between particles, benefiting for reducing the local stress concentration and improving the thermal shock resistance of refractories.

materials science, ceramics
Performance of Plasma-Sprayed Thermal Barrier Coating with Engineered Unmelted Nano-Particle Contents

L. Zhang,Y. Bai,T. He,W. Fan,Y. S. Ma,H. B. Liu,Y. Wang,Z. D. Chang,Y. X. Kang

DOI: https://doi.org/10.1016/j.surfcoat.2019.04.023

2019-01-01

Abstract:This paper provides an insight into the effect of unmelted nano-particle content (UNC) on the thermal cycling property and thermal insulation performance of plasma sprayed nanostructured yttria stabilized zirconia thermal barrier coatings. The results suggested that the as-sprayed nanostructured coating displayed a multi-modal microstructure, including the nano-grains (30-90 nm in size), submicron grains (110-900 nm in size) and unmelted nano-particles (20-60 nm in size). These unmelted nano-particles were loosely distributed among the nano-grains or submicron-grains. When the UNC increased from 11% to 34%, the bond strength of coating decreased from 28.1 MPa to 6.3 MPa and the thermal insulation temperature of coating increased from 135 degrees C to 170 degrees C. The coating with 22% UNC showed the highest thermal cycling life at 1250 degrees C since the unmelted nanoparticles significantly reduced the residual stress and effectively prevented the propagation of cracks. The thermal insulation temperature of coating increased with the increase of thermal cycles and reached its maximum after approximately 600 cycles due to the coalescence of cracks located at the unmelted nano-particles/crystalline region interface. The performance of nanostructured coating can be tailored by modulating the UNC.
Effect of annealing in different media and pulse electron beam irradiation on the properties of calcium fluoride nanopowder

S. Yu Sokovnin,V.G. Il'ves,M.A. Uimin

DOI: https://doi.org/10.1016/j.ceramint.2024.02.059

IF: 5.532

2024-02-01

Ceramics International

Abstract:Using the method of evaporation by pulsed electron beam in vacuum the mesoporous nanopowder of CaF2 with a specific surface area up to 91.5 m2/g was produced. The effect of annealing in different media and irradiation with a nanosecond electron beam (700 keV) on the evolution of the magnetic, luminescent and textural properties of CaF2 nanoparticles have been studied. For the first time, a joint effect of the annealing medium and the absorbed dose of a relativistic electron beam irradiation on the specific surface area and magnetization of mesoporous nanopowders of the CaF2 was discovered, which confirms the defective nature of ferromagnetism at room temperature of CaF2 nanopowders. The effect of nanopowder surface properties on ferromagnetism at room temperature after annealing in different media is shown, a parameter for assessing this influence is proposed. It was found that annealing and irradiation caused a significant change only in the visible range, of the pulse cathodoluminescence spectra of the CaF2 nanopowder, with the temperature and medium of the nanopowder pre-annealing as well as the irradiation dose being important. The relationship between luminescent and magnetic properties of nanopowder was shown.

materials science, ceramics
Effect of Heat Treatment on the Mechanical and Tribological Properties of Dual-Reinforced Cold-Sprayed Al Coatings

Kia Min Phua,Thomas Stapel,Troy Y. Ansell

DOI: https://doi.org/10.3390/jmmp7010032

2023-01-28

Journal of Manufacturing and Materials Processing

Abstract:The aluminum cold spray feedstock powder was single- and dual-reinforced with no greater than 2 vol% boron nitride nanoplatelets (BNNP) and/or nanometric boron carbide (nB4C). These powders were cold sprayed onto Al-6061 substrates and then heat-treated in an argon environment. In addition, micro- and nano-indentation hardness and wear testing were performed on the heat-treated samples. Further microscopy and optical profilometry were used to characterize the microstructure and wear track volumes. Minimal changes to the splat structure were observed after heat treatment. However, when compared to the pure Al coating, microhardness improved with reinforcement after treatment at 500 °C, while nanohardness improved only in the dual-reinforced coatings, again after treatment at 500 °C. The elastic modulus generally decreased for the reinforced coatings after treatment; however, indentation test results were mixed. The wear testing done on samples heat treated at 500 °C for one hour showed increases in the specific wear rate for single-reinforced coatings but decreases in the dual-reinforced coatings. These results indicate that both dual-reinforcement and heat treatment are required for improvements in the mechanical and tribological properties of Al nanocomposites.
Size Effect of Nanocrystalline BaTiO3 Ceramics

Deng Xiangyun,Wang Xiaohui,Li Longtu

DOI: https://doi.org/10.3321/j.issn:1002-185X.2008.z1.213

2008-01-01

Rare Metal Materials and Engineering

Abstract:The bulk dense nanoceramics BaTiO3 of crystalline size 15-100 nm were prepared by the spark plasma sintering method. In-situ heating Raman spectroscopy revealed the dispersive phase transition character in the nanocrystalline BaTiO3 ceramics. The BaTiO3 ceramics of the nanograin of 15 nm exhibited the similar phase transformations from rhombohedral to orthorhombic to tetragonal to cubic transitions as those in the coarse BaTiO3 ceramics.
Effect of heat treatment on dynamic magnetic properties and microstructures of Fe73.5Cu1Nb3Si13.5B9 nanocrystalline alloy

Jian Zhou,Li Meng,Fuyao Yang,Guang Ma,Leng Chen

DOI: https://doi.org/10.1007/s10854-017-6381-0

2017-03-09

Abstract:In this work, as-quenched Fe73.5Cu1Nb3Si13.5B9 amorphous strips were treated by conventional one-step and two-step annealing processes, respectively. And the magnetic properties (core loss and dynamic coercivity), crystallization kinetics and microstructures of annealed samples were investigated. Results show that two-step annealing process can effectively improve magnetic properties and optimize microstructures. More uniform grain size distribution was achieved by two-step annealing process compared with one-step annealing process, owing to promoting nanocrystallite nucleation and inhibiting further grain growth by two-step annealing process. And some nanocrystallites tend to be adjacent to grain boundary rather than be surrounded by remaining amorphous in all surfaces of nanocrystallines. Nevertheless, too much low-angle grain boundaries in nanocrystalline ribbons would lead to deteriorate magnetic properties. What interesting is that the relation, between dynamic coercivity and external field, associated with nanocrystallization temperature, could be a practical method to characterize the change mechanism of magnetization, and needs to be confirmed by further theoretical and experimental investigation.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Influence of nano-ZrO2 on the mechanical and thermal properties of high temperature cementitious thermal energy storage materials

Huiwen Yuan,Yu Shi,Zhongzi Xu,Chunhua Lü,Yaru Ni,Xianghui Lan

DOI: https://doi.org/10.1016/j.conbuildmat.2013.06.088

IF: 7.4

2013-01-01

Construction and Building Materials

Abstract:•Study on the mechanical-thermal properties of aluminate cement pastes with nano-ZrO2.•Different heat treatment temperatures on thermal properties of composite cement paste.•Find the optimum nano-ZrO2 amount of cement-based pastes on properties.
Effect of thermal annealing on the average and local structure of superconducting polycrystalline NbRe films

Zahra Makhdoumi Kakhaki,Alberto Martinelli,Francesco Avitabile,Angelo Di Bernardo,Carmine Attanasio,Carla Cirillo

DOI: https://doi.org/10.1088/1361-6668/ad8122

2024-09-29

Superconductor Science and Technology

Abstract:NbxRe1−x is a non-centrosymmetric superconductor recently realized in thin film form. The access to the basic physics that governs this material is hindered by the polycrystalline structure of the films which consist of grains of small dimensions. In these conditions, films are not decisive in revealing the nature of the superconducting order parameter, and, in particular, the possible presence of a spin-triplet component. In this work, post-deposition annealing procedures were performed to improve the crystalline quality of the as-grown films. As determined by X-ray diffraction measurements, by tuning the annealing process, it was possible to increase the crystalline size from 1-2 nm up to several nanometers. Pair distribution function analyses revealed the non-centrosymmetric crystal structure of the treated NbRe films. Finally, electrical transport measurements, performed to study the relationship between structural and transport properties of the samples, showed a reduction of the superconducting critical temperature after the thermal treatment, which can be reasonably ascribed to oxygen contamination. These, results will be useful to realize films for future experiments meant to access nature of the superconducting order parameter.

physics, condensed matter, applied
The Influence of Residuals Combining Temperature and Reaction Time on Calcium Phosphate Transformation in a Precipitation Process

Farnaz Ghajeri,Klaus Leifer,Anders Larsson,Håkan Engqvist,Wei Xia

DOI: https://doi.org/10.3390/jfb13010009

2022-01-19

Journal of Functional Biomaterials

Abstract:Precipitation is one of the most common processes to synthesize hydroxyapatite, which is the human body’s mineral forming bone and teeth, and the golden bioceramic material for bone repair. Generally, the washing step is important in the precipitation method to remove the residuals in solution and to stabilize the phase transformation. However, the influence of residuals in combination with the reaction temperature and time, on calcium phosphate formation, is not well studied. This could help us with a better understanding of the typical synthesis process. We used a fixed starting ion concentration and pH in our study and did not adjust it during the reaction. XRD, FTIR, ICP-OES, and SEM have been used to analyze the samples. The results showed that combining residuals with both reaction temperature and time can significantly influence calcium phosphate formation and transformation. Dicalcium phosphate dihydrate formation and transformation are sensitive to temperature. Increasing temperature (60 °C) can inhibit the formation of acidic calcium phosphate or transform it to other phases, and further the particle size. It was also observed that high reaction temperature (60 °C) results in higher precipitation efficiency than room temperature. A low ion concentration combining reaction temperature and time could still significantly influence the calcium phosphate transformation during the drying.
Effect of Reaction Condition on Crystallization Behavior of NaX Sieve

WANG Yin-ye,GUO Xiao-xia,ZHANG Jing,CHEN Xu,WANG Lei

DOI: https://doi.org/10.16552/j.cnki.issn1001-1625.2011.06.044

2011-01-01

Abstract:The calcined kaolin in Shanxi was used as raw material to synthesize nano-scale NaX molecular sieve in one ton-reaction vessel by direct hydrothermal method without template,seed,directed agents or any additives.The effects of alkalinity,temperature and reaction time on crystallization behavior of NaX nano-molecular sieve were explored in the pilot phase by XRD experiment.The process and products in the pilot-scale were characterized by TEM and IR.The results indicated that the suitable mole composition of one ton-reaction vessel was n(Na2O)/n(SiO2)= 1.5 and the best crystallizing time was 4 h,at 100 ℃.The products were nano-NaX molecular sieve with uniform size distribution in nano-scale and complete crystal form,also match the standard X.

Effect of thermal treatments on the reactivity of nanosized calcium phosphate powders

Effect of Thermal Treatments on the Reactivity of Nanosized Tricalcium Phosphate Powders

The Effect of Annealing on Microstructure and High Temperature Erosion Property of Arc-Spraying Coatings Containing Nanosized Ceramic Powders

The Effect of Calcination Temperature on the Structure and Performance of Nanocrystalline Mayenite Powders

Effects of the coating process on nanoscale Y2O3:Eu3+ powders

Effect of Heat Treatment of Nano-Hydroxyapatite Coatings Prepared Using Electrohydrodynamic Deposition

Heat Treatment During Preparation of Nano-zirconia Powders by the Liquid-phase Process

The Effect of Nanoparticles on the Properties of Calcium Aluminate Cement Pastes at High Temperatures

Effects of Nanoparticle Treatment on the Crystallization Behavior and Mechanical Properties of Polypropylene/calcium Carbonate Nanocomposites

Effect of Ca/P Molar Ratio and Heat Treatment on Thermal Decomposition and Reconstitution of Hydroxyapatite

Effect of thermal treatment on the structural, morphological, and chemical properties of apatite bioceramicsmaterials

Effect of particle grading on fracture behavior and thermal shock resistance of MgO-C refractories

Performance of Plasma-Sprayed Thermal Barrier Coating with Engineered Unmelted Nano-Particle Contents

Effect of annealing in different media and pulse electron beam irradiation on the properties of calcium fluoride nanopowder

Effect of Heat Treatment on the Mechanical and Tribological Properties of Dual-Reinforced Cold-Sprayed Al Coatings

Size Effect of Nanocrystalline BaTiO3 Ceramics

Effect of heat treatment on dynamic magnetic properties and microstructures of Fe73.5Cu1Nb3Si13.5B9 nanocrystalline alloy

Influence of nano-ZrO2 on the mechanical and thermal properties of high temperature cementitious thermal energy storage materials

Effect of thermal annealing on the average and local structure of superconducting polycrystalline NbRe films

The Influence of Residuals Combining Temperature and Reaction Time on Calcium Phosphate Transformation in a Precipitation Process

Effect of Reaction Condition on Crystallization Behavior of NaX Sieve