Abstract:The effects of the microstructure evolution of amorphous carbon on the tensile behavior of polyacrylonitrile (PAN)-based carbon fibers were investigated. The microstructure as a function of heat treatment temperature was characterized by means of XRD, HRTEM and Raman spectra. It is found that the amorphous carbon content decreases with increasing heat treatment temperature and that the densities of the carbon fibers increase is due to the removal of the impurity elements and the shrinking of the graphite planes. The amorphous carbon parallel to the graphite planes transforms into graphite planes and stacks on the graphite crystallites, leading to the increase in the graphite crystallite thickness. And the graphite crystallite length is increased through the amorphous-to-crystallite transition which occurs at the edges of graphite planes and the coalescence between two adjacent graphite crystallites. It is found that the tensile behavior of PAN-based carbon fibers mainly depends on the microstructure evolution of amorphous carbon. The reactions between sp2 carbon clusters and graphite planes improve the cross-linking among graphite crystallites, which has a positive effect on the tensile strength of the carbon fibers. However, a large number of structural defects and residual stresses, introduced by the rearrangement of graphite planes, are the main reasons for the degradation of the tensile strength. The tensile strains of the carbon fibers decrease and the tensile modulus increase with the decrease in the amorphous carbon content, which are mainly due to the amorphous-to-crystallite transition in the skin region.

Effect of Graphitization on the Morphologies and Microstructures of Micro-coiled Carbon Fibers

In Situ Fabrication and Graphitization of Amorphous Carbon Nanowires and Their Electrical Properties

Effect of Graphitizing Treatment on Structure of Carbon Nanotubes

Micro- and nano-structural investigations of C/C composites

A comprehensive study on the effect of carbonization temperature on the physical and chemical properties of carbon fibers

Effect of Heating Rate on Morphology and Structure of Cofe2o4 Nanofibers

Graphitization Behavior of Carbon Nanofibers Prepared by the Floating Catalyst Method

Dependence of Carbon Fiber Morphology with Deposition Conditions

Vapor-Liquid-Solid-Solid Growth Mechanism of Carbon Micro-coils

Graphitization behaviour of chemically derived graphene sheets

Evolution of carbon nanostructures during coal graphitization: Insights from X-ray diffraction and high-resolution transmission electron microscopy

Growth of well-crystallized segmented graphite nanofibers by catalytic chemical vapor deposition

Electrical Properties of A Single Microcoiled Carbon Fiber

Graphitisation and microstructure transformation of carbon-encapsulated cobalt nanoparticles synthesised by chemical vapour deposition using alumina powder as catalytic support

Effect of Net-shaped and Skin-core Structure on the Evolution of Making High Performance Carbon Fibers

Low-temperature Fabrication of Carbon Nanofibers with Improved Graphitization Via Incorporating Carbonaceous Inclusions

The effect of carbon nanotubes on the microstructure and morphology of pyrolytic carbon matrices of C–C composites obtained by CVI

Micro-mesoporous Graphitic Carbon Nanofiber Membranes

Microstructure and Electrical Resistivity of Carbon/carbon Composites Prepared by Thermal Gradient Chemical Vapor Infiltration

Effect of amorphous carbon on the tensile behavior of polyacrylonitrile (PAN)-based carbon fibers

Effect of pre-oxidation temperature and heating rate on the microstructure of lignin carbon fibers