Abstract:Highly densified CNT yarns with good mechanical, electrical, and electrothermal properties are manufactured by a continuously twisting method while the yarn is still wet. This strategy is expected to facilitate the large‐scale preparation of CNT yarns and their application in smart devices in the near future. Carbon nanotubes (CNTs) are promising blocks for building advanced yarns with unique structural and functional attributes. However, the complexity of fabrication and high cost has hindered the widespread adoption of CNT yarns. In this study, a rapid and continuous twisting wet spun yarn strategy to produce highly densified CNT yarns is presented. The method involves effectively dispersing CNTs in the surfactant dispersion, swiftly removing the surfactant in the coagulation bath and twisting treatment to effectively improve the density of yarn and the orientation of CNT. Detailed characterizations on the influence of each spinning conditions reveal that twisting treatment significantly enhances the packing density of yarns, improves the orientation of CNTs, and mitigates the impact of impurities on conductivity. The resulting CNT yarns exhibit a remarkable tensile strength of 600 MPa, a Young's modulus of ≈40 GPa, and a high conductivity of 8990 S cm−1. When utilized as a yarn heater, the CNT yarn demonstrates an ultra‐fast electrothermal response of over 1000 °C s−1 at a low operating voltage of 5 V. Impressively, the mechanical properties of CNT yarns show good stability during heating. This study provides a perspective of structural engineering for the large‐scale preparation of high‐performance CNT yarns.

Low-temperature Fabrication of Carbon Nanofibers with Improved Graphitization Via Incorporating Carbonaceous Inclusions

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

In Situ Fabrication and Graphitization of Amorphous Carbon Nanowires and Their Electrical Properties

Carbon Welding by Ultrafast Joule Heating.

Effect of Heating Rate on Morphology and Structure of Cofe2o4 Nanofibers

In Situ Synthesis of Self-Assembly Supramolecular Crystal Seeds within Continuous Carbon Nanofibers for Improved Fiber Graphitic Structure

2D-Topology-seeded Graphitization for Highly Thermally Conductive Carbon Fibers

Two‐dimensional Topology‐Seeded Graphitization for Highly Thermally Conductive Carbon Fibers

Molecular structure effects of mesophase pitch and isotropic pitch on morphology and properties of carbon nanofibers by electrospinning

Graphene Interlocking Carbon Nanotubes for High-Strength and High-Conductivity Fibers.

Carbon nanofibers prepared via electrospinning

Graphitic nanofibres from electrospun solutions of PAN in dimethylsulphoxide

In Situ Electrothermal Approach for the Synthesis of High-Performance Carbon Fiber

Electrospinning of Neat Graphene Nanofibers

Carbon Nanotubes/Graphene-Skinned Glass Fiber Fabric with 3D Hierarchical Electrically and Thermally Conductive Network

Electrochemical Properties of Carbon Nanofibers As the Negative Electrode in Lithium-Ion Batteries

Single-wall carbon nanotube fiber non-woven fabrics with a high electrothermal heating response

Wet Twisting in Spinning for Rapid and Cost‐Effective Fabrication of Superior Carbon Nanotube Yarns

Epitaxial Growth of Aligned and Continuous Carbon Nanofibers from Carbon Nanotubes.

Catalyzed Filling of Carbon Nanotube Array with Graphite and the Thermal Properties of the Composites

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration