Abstract:In this paper, we study the deformation behavior of nickel-based superalloys by in-situ EBSD and uniaxial tensile tests. This study mainly focuses on the microstructure evolution in the same area of the sample during deformation, including the evolution of various types of grain boundaries, geometrically necessary dislocations, grain orientations and texture, and their effect on the mechanical properties. The results show that the rotation of grains is closely related to their initial orientation during deformation. The lattice of grain is rotated to a certain extent to accommodate the more favorable orientation under low strain, leading to higher Schmid factors for the sample. Under large stresses, the grains occur deformation, multiple slip systems start simultaneously or alternately and the Schmid factors value gradually tends to stabilize at a lower level. Meanwhile, the texture orientation density of the initial Rotating cubic {001} texture, α-fiber (RD// ) texture, and γ-fiber (ND // ) gradually decrease or even disappears, while the texture orientation density of Copper {112} and Goss {011} increases during uniaxial tensile deformation for Cr20Ni80 alloy. Grain rotation may be a result of large strain due to stress triaxiality and resulting plane stress condition owing to specimen dimension, which is beneficial to improve the plastic deformability of the alloy. Interestingly, with the increase of strain, the average misorientation angle first decreases and then increases, which is associated with the dislocation density. In addition, serious torsion occurs in the grains during this process, forming a large number of substructures. These substructures result in grain refinement and the Hall-Petch effect. In fact, during the deformation process, multiple strengthening mechanisms act in coordination, leading to an increase in the strength of the alloy.

In Situneutron Diffraction Study of Micromechanical Interactions and Phase Transformation in Ni–Mn–Ga Alloy under Uniaxial and Hydrostatic Stress

Insitu Neutron Diffraction Study of Micromechanical Interaction and Phase Transformation in Dual Phase Niti Alloy During Tensile Loading

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

In-Situ High-Energy Synchrotron X-Ray Diffraction Study of Micromechanical Behavior of Multiple Phases in Ni47ti44nb9 Shape Memory Alloy

In-situ TOF Neutron Diffraction Studies of Cyclic Softening in Superelasticity of a NiFeGaCo Shape Memory Alloy

A Study of Stress-Induced Phase Transformation and Micromechanical Behavior of CuZr-based Alloy by In-Situ Neutron Diffraction

Manipulation of microstructure evolution and deformation behavior in Ni–Mn–Ga shape memory alloys with varied Ni/Ga under uniaxial cyclic compression

Neutron Diffraction Study on Strain Rate Dependent Mechanical Response in Superelastic NiTi Alloy: Bulk Structural Evolution and Constitutive Model

Stress-induced detwinning/reorientation of hierarchically twinned martensite and deformation micro-mechanism in Ni52Mn27Ga17Co4 shape memory alloys: Experimental and phase-field studies

γ′-size effect on the deformation microstructure and texture in a Ni-based superalloy using in-situ neutron diffraction

Magnetic Properties and Structural Phase Transformations of NiMnGa Alloys

Phase Transition Strain and Magnetic-Field-induced Strain in Ni_(46)Cu_4Mn_(38)Sn_(12) Heusler Alloy

In-situ neutron diffraction studies on high-temperature deformation behavior in a CoCrFeMnNi high entropy alloy

In-situ neutron diffraction investigation of two-stage martensitic transformation in a 13%Mn steel with serrated deformation

In situ study of non-equilibrium solidification of CoCrFeNi high-entropy alloy and CrFeNi and CoCrNi ternary suballoys

Control of microstructure using magnetic fields and study of the mechanical behavior of Ni-rich Ni-Mn-Ga alloys

A model of phase transition from austenite to martensite in single-crystal NiMnGa alloys

In situ neutron diffraction study of fatigue behavior of CrFeCoNiMo0.2 high entropy alloy

Micromechanics reveal strain rate dependent transition between dislocation mechanisms in a dual phase high entropy alloy

HighP-TNano-Mechanics of Polycrystalline Nickel.

In-situ EBSD study of deformation behavior of nickel-based superalloys during uniaxial tensile tests