Abstract:Rectangular explosive charges are usually used in military or civilian explosive transportation and storage. The effects of shape parameters and detonation positions on the peak overpressure and maximum impulse of blasts lack comprehensive investigation, which is significant for the design of blast-resistant structures. In this paper, the side-length ratio of the rectangle, orientation, and detonation position of the charge are chosen as controlling parameters to investigate their influence on blast loads in the scaled distances of the gauges ranging from 0.63 to 10.54 m/kg 1/3 with well validated 3D numerical simulations. The results show that there is a large difference in the near-field spatial distribution of the blast load of the rectangular charge; if the blast load of the rectangular charge is simply evaluated with the spherical charge, the maximum peak overpressure (maximum impulse) will be underestimated by a factor of 7.46 (4.84). This must be taken seriously by blast-resistant structure designers. With the increase in the scaled distance, when the critical scaled distance is greater than 6.32 (7.38) m/kg 1/3 , the influence of the charge shape on the maximum peak overpressure (maximum impulse) of the spatial blast load can be ignored. In general, the impact of detonation of the charge at the end on the maximum peak overpressure is greater compared with central detonation, but for the impact of the maximum impulse, it is necessary to pay attention to the side-length ratio of the rectangular charge and the specific detonation position on the end face. Furthermore, the structural response of steel plates placed at different azimuths under the blast load of a rectangular charge is preliminarily analyzed, and the results show that the deformation and energy of the plates are consistent with the distribution of the blast load. These analysis results provide a reference for the explosion protection design in near-field air explosions.

Research on Damage Effect of Explosion Wave of Solid Rocket Motor with High Energy Propellant

The Effect of Explosion Parameters on Seismic Source Wavelet Calculation and Its Characteristics

Research of Loading Effects of Blast in Air

Experimental Research on Electron Density in Solid-Rocket Motor Plume

Rapid Evaluation of the Destructive Power Caused by Accidental Explosion of Space Launch Vehicles

AN EXPERIMENTAL STUDY ON HEAT PROCESSES PROPERTES OF LIQUID PROPELLANT ROCKET EXPLOSION

Damage characteristics and failure mechanism analysis of NEPE propellant at high strain rates

Study on Dynamic Impact and Ignition Response Behavior of GAP/PET/RDX Based Propellant

Method of Determining the Critical Impact Velocity of Energetic Devices

Establishment and analysis of damage calculation model under fuel air explosion effect

Study on Pressure Reconstruction Method of Explosion Shock Wave

Effects of Thermal Damage on Impact Response Characteristics of High-Energy Propellants

Propagation characteristics of blast shock waves in low-pressure environment

THEORETICAL STUDY ON THERMAL PROCESSES PROPERTIES IN LIQUID PROPELLANT ROCKET EXPLOSION

Numerical Simulation and Analysis of Shelled Explosive Penetrated but Not Detonated

Numerical Investigation on Anti-Explosion Performance of Non-Metallic Annular Protective Structures

Simulation and experiment of explosion shock wave in semi-closed environment

Assessing the thermal safety of solid propellant charges based on slow cook-off tests and numerical simulations

Study on Damage Characteristics of Typical Tank Targets under Shock Wave Load

Study on the effect of shape parameters and initiation points of rectangular high explosive on the spatial distribution of blast loads

Mitigation effects on the reflected overpressure of blast shock with water surrounding an explosive in a confined space