Abstract:Accurate estimation of the seismic response of structures is an important issue in aseismic design. Under earthquake excitations, the deformation and internal force distributions of structures are quite complex. This is particularly true for irregular structures under multiple directional seismic loads. In most current engineering practice, only those response quantities which are linear combinations of the nodal displacements are considered to be critical for design. However, this may not always be the case, especially for those systems enhanced with high damping devices. For example, the relative nodal velocities are important for the design of the dampers and the nodal absolute accelerations determine the strength demand of the nonstructural components. This paper presents a time-history-based formulation of the responses for generally damped linear systems excited by multiple directional seismic loads through modal analysis. Solutions to the structural nodal displacements, the nodal velocity and absolute acceleration responses are derived. It is shown that the modal response quantities required in the nodal velocity and absolute acceleration are identical to those that are required in the structural displacement responses. Moreover, most response quantities of interest for seismic evaluation and design can be obtained through the linear transformation of the structural displacement, velocity or absolution acceleration as long as the structure remains in the elastic range (e.g. inter-story drift, story shear, nodal relative velocity, floor acceleration, etc.). A unified form capable of representing these response quantities is therefore established.

A Simplified Method for Calculating Modulus Ratio and Damping Ratio Considering Vertical Seismic Motion

Calculation Method for the Exceedance Probabilities of Dynamic Shear Modulus Ratio and Damping Ratio of Conventional Soils

Effects on Maximum Shear Strain of Soil Layer Surface of Vertical Seismic Motion

Static and dynamic inelastic P -Δ effect for seismic design

SEISMIC FORCE MODIFICATION FACTORS FOR STRUCTURES WITH SHEAR-SLIP HYSTERETIC MODEL

An new method for calculation of dynamic modulus and damping ratio based on theory of correlation function

A Simplified Method Of Seismic Response Analysis Of Soil-Underground Structure System

A Modified Newmark Method for Calculating Permanent Displacement of Seismic Slope Considering Dynamic Critical Acceleration

Simplified analysis method for energy dissipated frame structures with visco?elastic dampers considering SSI effects

Dynamic Shear Modulus of Undisturbed Soil under Different Consolidation Ratios and Its Effects on Surface Ground Motion

Experimental Study on Dynamic Elastic Modulus and Damping Ratio of Xiaoshan Saturated Soft Clay Considering Initial Deviator Stress

VERTICAL VIBRATION ANALYSIS OF AXISYMMETRIC SATURATED SOIL

Dynamic P-△ Effects on Seismic Force Modification Factors

A Unified Form for Response of 3 D Generally Damped Linear Systems under Multiple Seismic Loads through Modal Analysis

A practical simulation method of spatially correlated earthquake ground motions

A simplified analysis method for estimating the peak responses of recentering structures with viscous damping systems

Resonant Column Test on the Frozen Silt Soil Modulus and Damping at Different Temperatures

Nonlinear model based on damping ratio for clays under seismic loading

Maximum Seismic Displacement of SDOF System with Viscous Damper Based on the Equal Cyclic Energy Criteria

Dynamic Shear Modulus And Damping Ratio Of Recently Deposited Soils In The Coastal Region Of Jiangsu Province

Effects of Seismic Vibration on Small Strain Shear Modulus of Saturated Silt