Abstract:Efficient heat transfer in PHEs relies on optimizing flow distribution to minimize thermal dead zones. Existing studies have predominantly focused on single-phase fluids as working media and employed density-based methods for structural optimization of microchannel heat exchangers at small scales. In this study, the Brinkman term from the porous media flow model is introduced in an innovative manner, along with the utilization of a material density interpolation model, which builds upon the density-based approach. A novel two-phase fluid topology optimization method is proposed, specifically tailored for large-scale PHE operating conditions, resulting in the successful design of a new PHE topology. To compare the performance of the two heat exchangers, finite element simulation, visualization experiments, and thermodynamic performance testing are conducted. The simulation results reveal that the heat transfer capacity of the topological PHE is 810 W with pressure drops of 18.8 kPa, while the dimple PHE exhibits heat transfer capacity of 652 W with pressure drops of 25.9 kPa. Compared to the dimple PHE, the topological PHE demonstrates 24.2 % improvement in heat transfer performance and 27.8 % reduction in pressure drop. The dimensionless comprehensive heat transfer coefficient (j/f) indicates that the overall performance of the topological PHE significantly surpasses that of the traditional PHE. Furthermore, the visualization experiment results demonstrate that the complex texture structure of the topological PHE effectively induces fluid motion, compelling the fluid to flow along the texture direction. This significantly mitigates the issue of uneven flow within the PHE, thus enhancing heat transfer efficiency. Specifically, the topological PHE exhibits inlet-outlet temperature difference of 10.3 degrees C and pressure drops of 11.2 kPa, while the dimple PHE shows inlet-outlet temperature difference of 6 degrees C and pressure drops of 12.9 kPa. The findings of this study provide guidance for future research endeavors aimed at evaluating potential solutions to advance heat transfer in PHEs and facilitate the implementation of thermal management strategies.

Steady-state and Dynamic Performance of High Temperature Compact Plate-Fin Heat Exchanger

Thermal Design of Large Plate-Fin Heat Exchanger for Cryogenic Air Separation Unit Based on Multiple Dynamic Equilibriums

Segmented Design of Performance Enhancement for Large Plate Fin Heat Exchanger of Cryogenic Air Separation Unit

Performance Research of High Temperature Compact Offset Strip Fin Heat Exchanger

Performance Analysis of High Temperature Three-fluid Compact Heat Exchanger

Dynamic Performance Modeling and Simulation of the Counterflow Plate-fin Heat Exchanger

Hydraulic and Thermal Performances of A Novel Configuration of High Temperature Ceramic Plate-Fin Heat Exchanger

RESEARCH PROGRESS OF PLATE FIN HEAT EXCHANGER

A General Simulation Model for Performance Prediction of Plate Fin-and-tube Heat Exchanger with Complex Circuit Configuration

Dynamic Modeling And Simulation Of Distributed Parameter Heat Exchanger

CFD-based structure optimization of plate bundle in plate-fin heat exchanger considering flow and heat transfer performance

Thermodynamic characteristics of counter flow and cross flow plate fin heat exchanger based on distributed parameter model

CFD Techniques for the Design of Plate-fin Heat Exchangers with Plain Fins and Serrated Fins

A Thermal Design Method for the Performance Optimization of Multi-Stream Plate-Fin Heat Exchangers

Design and optimization of a new heterogeneous printed circuit plate heat exchanger with molten salt zigzag passage and supercritical CO2 airfoil fin passage

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter

Numerical Simulation and Thermodynamic Test Analysis of Plate Heat Exchanger Based on Topology Optimization

Numerical Simulation of Rapid Heat Storage in Plate-Fin Phase Change Heat Exchanger

Numerical Simulation and Analysis of Performance of Fin-and-tube Heat Exchanger with Complex Circuit Arrangement

Fluid-Thermal-Mechanical Coupled Analysis and Optimized Design of Printed Circuit Heat Exchanger with Airfoil Fins of S-CO2 Brayton Cycle

Performance Optimization Of Compact Ceramic High Temperature Heat Exchangers