Abstract:Abstract The heat storage technology can improve the performance of a solar thermal utilization system effectively. This work studied the effect of phase-change materials (PCMs) on thermal stratification in a heat storage tank. A 60 l sodium acetate trihydrate heat storage tank with 331.15 K phase-change temperature was designed and fabricated. A mathematical model was built to simulate the discharge process in the water tank, and the temperature distribution during the discharge process was obtained. The computational fluid dynamics model was verified by the experimental data. Furthermore, the Ri, the fill efficiency, and the MIX number were adopted to extensively analyze the performance of a heat storage tank with different positions of PCMs with the variation of flow rates. The results indicated that the distance between the isothermal surfaces of 303.15 K and 348.15 K in PCM1, PCM2, PCM3, and PCM4 were 11.75 cm, 11.13 cm, 10.52 cm, and 9.28 cm, respectively, with 9 l/min of flow velocity when t* = 0.7, showing that the thermal stratification was improved as the position of the PCMs got closer to the inlet. The PCMs’ half-life (the liquefaction rate reached 50%) was prolonged as the inlet flow rates increased. As the flow rate increased from 1 l/min to 5 l/min, the half-life of PCM4 delayed from a dimensionless time of 0.5 to a dimensionless time of 0.9. Moreover, when the flow velocity was 9 L/min, the liquefaction rate of PCM4 remained at 1. The calculated values of fill efficiency and Richardson number were higher than the experimental data slightly, while the MIX number was smaller than the experimental results. The experimental and calculated values of root mean square error (RMSE) increased with the increasing inlet flow velocity and the lowering of the positions of the PCMs.

Modeling a Spiral Coil Phase-Change Thermal Energy Storage Tank with Cooling Agent As Cyclic Material

A New Model of Phase Change Process for Thermal Energy Storage

STUDY ON CHARGING AND DISCHARGING RATES OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS EMPLOYING MULTIPLE PHASE CHANGE MATERIALS

Numerical Simulation of Thermal Energy Storage using Phase Change Material

Discharging Characteristics Modeling of Cool Thermal Energy Storage System with Coil Pipes Using N-Tetradecane As Phase Change Material

The Thermal Stratification Evaluation of Phase-Change Materials in a Heat Storage Tank: Computational Fluid Dynamics and Experimental Study

Experimental and numerical research on thermal characteristics of phase change thermal storage device

Numerical simulation on the thermal performance enhancement of energy storage tank with phase change materials

Analysis of the Thermal Performance of Thermal Energy Storage Systems Using PCM Capsules

Investigation of the Dynamic Melting Process in a Thermal Energy Storage Unit Using a Helical Coil Heat Exchanger

Thermal Energy Discharge Performance of PCM-based Cylindrical Shell-and-tube Energy Storage Cell

Modeling of Thermal Energy Storage Shell-and-Tube Heat Exchanger

Experimental and numerical study on thermal performance and inlet and outlet structure optimization of phase change heat storage tank

Experimental and Numerical Investigation on Enhancing Heat Transfer Performance of a Phase Change Thermal Storage Tank

An experimental investigation of cylindrical shaped thermal storage unit consisting of phase change material based helical coil heat exchanger

Influence of The PCM Volume Fraction on the Thermal Performance of Thermocline Thermal Energy Storage Tank Used in CSP Plants

THERMAL PERFORMANCE OF A LATENT HEAT THERMAL STORAGE MODULE WITH FLOW FLUID INSIDE TUBE AND PHASE CHANGE MATERIAL OUTSIDE

Thermal performance simulations of a packed bed cool thermal energy storage system using n-tetradecane as phase change material

Multizone Modeling for Hybrid Thermal Energy Storage

Numerical Simulation of Fin-tube Heat Pump with Phase Change Thermal Storage

Performance assessment of phase change material-based thermal energy storage