Abstract:The direct injection hydrogen internal combustion engines avoid backfires and have a higher power density, especially when coupled with a turbocharger. However, while previous researches have focused on specific aspects of direct injection hydrogen internal combustion engines, their whole combustion characteristics remain largely unclear. Therefore, this study aims to comprehensively investigate the combustion characteristics of turbocharged direct injection hydrogen internal combustion engines across the entire operating map in order to optimize their performance. The combustion characteristics are hypothesized to be significantly influenced by operating parameters, including the equivalence ratio, spark timing, start of injection, and other relevant factors. To achieve this, the experiments were conducted on a 2.0 L turbocharged direct injection hydrogen internal combustion engine, covering a wide range of operating conditions. Specifically, the engine speeds varied from 1000 to 4000 rpm, loads ranged from 3.7 to 10.6 bar, equivalence ratios spanned from 0.33 to 0.71, spark timing was adjusted within a range of 21 degrees of crank angle, and start of injection varied within a range of 80 degrees of crank angle. The experimental results reveal notable findings regarding the turbocharged direct injection hydrogen internal combustion engine. For instance, the maximum pressure rise rate of the turbocharged direct injection hydrogen internal combustion engine (3.85 bar/°CA at 1500 rpm) at various engine speeds at wide open throttle are greater than those of a turbocharged port fuel injection hydrogen internal combustion engine and a gasoline engine. Furthermore, variations in equivalence ratio and spark timing cause significant increases in pressure rise rate by 328.4% and 233.3%, respectively. The peak pressure rise rate characteristics provide valuable insights for optimizing the noise, vibration and harshness of turbocharged direct injection hydrogen internal combustion engines. Additionally, the burning duration demonstrates an initial increase and subsequent decrease with changes in the start of injection, aiding in the determination of the optimal start of injection for achieving high brake thermal efficiency. Overall, this research provides valuable insights into the macroscopic combustion characteristics of a turbocharged direct injection hydrogen internal combustion engine across different operating conditions. These findings not only can be directly applied to hydrogen internal combustion engines of the same displacement and type, but also can be applied to the design and development of hydrogen internal combustion engines with different displacements and types.

Effect of injection timing on backfire of port injection hydrogen engine

Backfire prediction in a manifold injection hydrogen internal combustion engine

Effect of Fuel Injection Timings and Hydrogen Fraction on Combustion Characteristics of Direct-Injection Engine

Experimental study on the combustion and emission performance of the hydrogen direct injection engine

Effects of hydrogen injection timing and injection pressure on mixture formation and combustion characteristics of a hydrogen direct injection engine

Experimental investigation of water injection and spark timing effects on combustion and emissions of a hybrid hydrogen-gasoline engine

Effect of Spark Timing on the Performance of a Hybrid Hydrogen–gasoline Engine at Lean Conditions

Experimental Study on the Impact of Hydrogen Injection Strategy on Combustion Performance in Internal Combustion Engines

Effect of ignition timing and hydrogen fraction on combustion and emission characteristics of natural gas direct-injection engine

An effective approach of dropping the backfire possibilities of a hydrogen‐fuelled opposed rotary piston engine

Effects of hydrogen injection strategy on the hydrogen mixture distribution and combustion of a gasoline/hydrogen SI engine under lean burn condition

Experimental Study on the Effects of Hydrogen Injection Strategy on the Combustion and Emissions of a Hydrogen/Gasoline Dual Fuel SI Engine under Lean Burn Condition

Research on optimum method to eliminate backfire of hydrogen internal combustion engines based on combining postponing ignition timing with water injection of intake manifold

Effects of hydrogen injection strategies on the flow field and combustion characteristics in a hydrogen-fueled rotary engine with the swirl chamber

Combustion analysis and emissions characteristics of a hydrogen-blended methanol engine at various spark timings

Effect of direct injection of small amounts of ethanol on port-injected hydrogen internal combustion engines

Effects of second hydrogen direct injection proportion and injection timing on combustion and emission characteristics of hydrogen/n-butanol combined injection engine

Effects of Various Compression Ratios on a Direct Injection Spark Ignition Hydrogen-Fueled Engine in a Single-Cylinder Engine

Combustion and emission characteristics of a port-injection HCNG engine under various ignition timings

Numerical Investigation of the Effect of Injection Timing on the In-Cylinder Activity of a Gasoline Direct Injection Engine

Combustion characteristics of a turbocharged direct-injection hydrogen engine