Abstract:Biofilms formed on metal surfaces strongly affect metallic instruments serving in marine environments. However, due to sampling difficulty, less has been known about the bacterial communities of the biofilm on metallic surfaces in hadal environments, so the failure process of these deep-sea metallic instruments influenced by microbial communities could be hardly predicted. In this research, seven alloys, including titanium, aluminum, and copper alloys, were exposed in Yap Trench hadal environment for 1 year. Thus, the communities of the biofilms formed on metallic surfaces at 5,772 m undersea in Yap Trench were initially reported in previous studies. Then, 16S rRNA gene sequencing was performed to visualize the in situ bacterial communities of the biofilms formed on titanium, aluminum, and copper alloys at 5,772 m undersea in Yap Trench. It was found that Proteobacteria was the dominant phylum in all samples, but distinct genera were discovered on various alloys. The titanium alloy provided a suitable substrate for a mutualistic symbiotic biofilm with abundant bacterial richness. Aluminum alloys without copper components showed the least bacterial richness and formed a cold-adapted and oligotrophic-adapted biofilm containing the genera Sulfurimonas and PS1 Clade, while copper-present alloys showed relatively high bacterial richness with copper-resistant or even copper-utilizing biofilms constituting the genera Stenotrophomonas, Burkholderia-Caballeronia-Paraburkholderia, and Achromobacter on the surfaces. Furthermore, among all the element components contained in alloys investigated in this research, copper element showed the strongest influences on the composition and function of microbial communities in the biofilms formed on various metallic surfaces.

AFM STUDY OF MICROBIOLOGICALLY INFLUENCED CORROSION OF COPPER ALLOYS

Applications of Atomic Force Microscopy to Microbiologically Induced Corrosion

Biocorrosion Characteristics of the Copper Alloys BFe30-1-1 and HSn70-1AB by SRB Using Atomic Force Microscopy and Scanning Electron Microscopy

Research on correlation between Streptococcus mutans'adhesion and surface roughness of Cu-Al alloy and Co-Cr alloy

A COMPARATIVE STUDY ON SULFATE REDUCING BACTERIA INFLUENCED CORROSION OF COPPER ALLOYS

AFM in Liquid and On-Spot Study of Metal Corrosion

INFLUENCE OF SULFATE REDUCING BACTERIA ON CORROSION BEHAVIOR OF HSn70-1A ALLOY

Study on Corrosion Behavior of BFe30-1-1 Copper Alloy in the Presence of Biofilm of Sulfate-Reducing Bacteria

Laboratory Investigation of the Microbiologically Influenced Corrosion (MIC) Resistance of a Novel Cu-bearing 2205 Duplex Stainless Steel in the Presence of an Aerobic Marinepseudomonas Aeruginosabiofilm

EFFECT OF THE SULFATE REDUCING BACTERIA BIOFILM ON PHASE BOUNDARY BETWEEN HSn70-1AB COPPER ALLOY AND SOLUTION

Corrosion behaviors and galvanic studies of microarc oxidation films on Al–Zn–Mg–Cu alloy

Studies on Sulfate Reducing Bacteria Influenced Corrosion of 90/10 Cu/Ni Alloy

Electrochemical Corrosion Behavior of Cu-15Ni-8Sn Alloy in Marine Microbial Medium

Study of Microbiologically Influenced Corrosion of LY12 Aluminum Alloy with Atomic Force Microscopy

Study of SRB Film on the Copper Alloy Surface Using Atomic Force Microscopy

Different effects of three soil microfloras on the corrosion of copper

Effect of Sulfate Reducing Bacteria on Corrosion of Copper Alloy HSn701-AB in Recycled Water

Study on the Bacterial Communities of the Biofilms on Titanium, Aluminum, and Copper Alloys at 5,772 m Undersea in Yap Trench

Elucidating Different Microbiologically Influenced Corrosion Behavior of Copper, 90/10 Cu-Ni Alloy, 70/30 Cu-Ni Alloy and Nickel from the Perspective of Element Content

Corrosion Behavior and Mechanism of a Cu-Ni Alloy in Marine Environment

Investigations on reducing microbiologically-influenced corrosion of aluminum by using super-hydrophobic surfaces