Abstract:A dynamic compression test was performed on alpha + beta dual-phase titanium alloy Ti20C using a split Hopkinson pressure bar. The formation of adiabatic shear bands generated during the compression process was studied by combining the proposed multi-scale crystal plasticity finite element method with experimental measurements. The complex local micro region load was progressively extracted from the simulation results of a macro model and applied to an established three-dimensional multi-grain microstructure model. Subsequently, the evolution histories of the grain shape, size, and orientation inside the adiabatic shear band were quantitatively simulated. The results corresponded closely to the experimental results obtained via transmission electron microscopy and precession electron diffraction. Furthermore, by calculating the grain rotation and temperature rise inside the adiabatic shear band, the microstructural softening and thermal softening effects of typical heavily-deformed alpha grains were successfully decoupled. The results revealed that the microstructural softening stress was triggered and then stabilized (in general) at a relatively high value. This indicated that the mechanical strength was lowered mainly by the grain orientation evolution or dynamic recrystallization occurring during early plastic deformation. Subsequently, thermal softening increased linearly and became the main softening mechanism. Noticeably, in the final stage, the thermal softening stress accounted for 78.4 % of the total softening stress due to the sharp temperature increase, which inevitably leads to the stress collapse and potential failure of the alloy. (C) 2020 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Microstructure evolution of adiabatic shear band in Ti-15Mo-3Al-2.7Nb-0.2Si alloy

Formation mechanics of adiabatic shear band for the different microstructures of TC6 alloy

Formation mechanism of adiabatic shear band of Ti-5Al-2.5Sn alloy

Fine Structure of Adiabatic Shear Band of TC6 Alloy under Different Evolvement Stages

Adiabatic Shear Bands in Ti-6Al-4V Alloy with Lamellar Microstructure

The Effects of Microstructure on the Dynamic Mechanical Response and Adiabatic Shearing Behaviors of a Near-α Ti-6Al-3Nb-2Zr-1Mo Alloy

Microstructural Evolution of Adiabatic Shear Bands in TA2

Quasi-Static and Dynamic Forced Shear Deformation Behaviors of Ti-5mo-5v-8cr-3al Alloy

Microstructural characteristics of adiabatic shear localization in a metastable beta titanium alloy deformed at high strain rate and elevated temperatures

Microstructural Evolution in High-Strain-Rate Deformation of Ti-5Al-5Mo-5V-1Cr-1Fe Alloy

Nanoindentation and Microstructure in the Shear Band in a Near Beta Titanium Alloy Ti-5Al-5Mo-5V-1Cr-1Fe

Shear Localization and Microstructure in Coarse Grained Beta Titanium Alloy

Investigations on Microstructure Evolution of TA1 Titanium Alloy Subjected to Electromagnetic Impact Loading

Microstructural Evolution in the Adiabatic Shear Bands of Predeformation Ta2

Adiabatic shear instability in a titanium alloy: Extreme deformation-induced phase transformation, nanotwinning, and grain refinement

Formation of Adiabatic Shearing Band for High-Strength Ti-5553 Alloy: A Dramatic Thermoplastic Microstructural Evolution

Capturing of the propagating processes of adiabatic shear band in Ti-6Al-4V alloys under dynamic compression

Evolution of Adiabatic Shear Bands in Typical Microstructure of Ti-6Al-4V Alloy

Multi-scale crystal plasticity finite element simulations of the microstructural evolution and formation mechanism of adiabatic shear bands in dual-phase Ti20C alloy under complex dynamic loading

The Microstructure Characterization of Adiabatic Shearing Band in Ti-17 Alloy at High Strain Rates and Elevated Temperatures

Shear Localization and Recrystallization in High Strain Rate Deformation in Ti-5Al-5Mo-5V-1Cr-1Fe Alloy