Abstract:A dynamic compression test was performed on alpha + beta dual-phase titanium alloy Ti20C using a split Hopkinson pressure bar. The formation of adiabatic shear bands generated during the compression process was studied by combining the proposed multi-scale crystal plasticity finite element method with experimental measurements. The complex local micro region load was progressively extracted from the simulation results of a macro model and applied to an established three-dimensional multi-grain microstructure model. Subsequently, the evolution histories of the grain shape, size, and orientation inside the adiabatic shear band were quantitatively simulated. The results corresponded closely to the experimental results obtained via transmission electron microscopy and precession electron diffraction. Furthermore, by calculating the grain rotation and temperature rise inside the adiabatic shear band, the microstructural softening and thermal softening effects of typical heavily-deformed alpha grains were successfully decoupled. The results revealed that the microstructural softening stress was triggered and then stabilized (in general) at a relatively high value. This indicated that the mechanical strength was lowered mainly by the grain orientation evolution or dynamic recrystallization occurring during early plastic deformation. Subsequently, thermal softening increased linearly and became the main softening mechanism. Noticeably, in the final stage, the thermal softening stress accounted for 78.4 % of the total softening stress due to the sharp temperature increase, which inevitably leads to the stress collapse and potential failure of the alloy. (C) 2020 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Fine Structure of Adiabatic Shear Band of TC6 Alloy under Different Evolvement Stages

Finite Element Analysis of Adiabatic Shear Band Formation in Titanium Alloy Cutting Process

Microstructural Evolution in the Adiabatic Shear Bands of Predeformation Ta2

Adiabatic shear instability in a titanium alloy: Extreme deformation-induced phase transformation, nanotwinning, and grain refinement

Investigations on Microstructure Evolution of TA1 Titanium Alloy Subjected to Electromagnetic Impact Loading

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500?C using in-situ EBSD tensile test

Multi-scale crystal plasticity finite element simulations of the microstructural evolution and formation mechanism of adiabatic shear bands in dual-phase Ti20C alloy under complex dynamic loading

Constitutive Model and Microstructure Evolution of a Novel TG6 High-Temperature Titanium Alloy during Hot Deformation

The Effects of Microstructure on the Dynamic Mechanical Response and Adiabatic Shearing Behaviors of a Near-α Ti-6Al-3Nb-2Zr-1Mo Alloy

Study on High-Temperature Flow Behavior and Substructure and Texture Evolution of TA15 Titanium Alloy

Effect of Α Phase Morphologies on Shear Localization Behavior of Tc4 Titanium Alloy at High Strain Rate

Grain Refinement Mechanism in Adiabatic Shear Band of Solution Treated Ti–10V–2Fe–3Al Alloy under High Strain Rate

Deciphering the microstructural evolution and adiabatic shearing behavior of the titanium alloy with stress-induced ω phase transformation during dynamic compression

Multiple Deformation Mechanisms in Adiabatic Shear Bands of a Titanium Alloy during High Strain Rate Deformation

High-temperature tensile deformation behavior and microstructure evolution of Ti55 titanium alloy

Analysis of Adiabatic Shearing Phenomenon and Dynamic Mechanical Performance on TA-6 of α-Titanium Alloy

Investigating the microstructural evolution during deformation of laser additive manufactured Ti–6Al–4V at 400 °C using in-situ EBSD

Experimental studies on the dynamic tensile behavior of Ti–6Al–2Sn–2Zr–3Mo–1Cr–2Nb–Si alloy with Widmanstatten microstructure at elevated temperatures

Shear localization behavior in hat-shaped specimen of near-α Ti−6Al−2Zr−1Mo−1V titanium alloy loaded at high strain rate

In-Situ SEM Study on Deformation and Failure Mechanism of TC4 Titanium Alloy by Laser Additive Manufacturing