Abstract:In large-scale welding processes involving complex geometries, variations in gap dimensions and the transition of filler wire form distinctive molten pool flow behaviors, significantly affecting weld formation and quality. This paper investigates the differences in the laser self-melting and wire-filling welding pool behavior of titanium alloy with variable gaps through both simulation and experimentation. An innovative three-dimensional transient heat-flow coupling model is developed to simulate laser welding with variable gap structures, incorporating the dynamics of the welding wire-filling process. The different laser welding modes and the filling process under the variable gap structure were numerically simulated. The results indicate that the maximum flow rate of the laser self-melting pool remains stable in proximity to the keyhole, reaching a maximum of approximately 2.491 m/s, with molten metal entering through the area surrounding the keyhole. As the gap size gradually increases to 0.2 mm during the laser self-fusion welding stage, keyhole instability becomes more pronounced. In transitioning from laser self-fusion to wire-filling welding, the welding wire behavior can be divided into three stages. The molten metal at the end of the welding wire is transferred to the liquid melt pool through a liquid metal bridge. The flow rate of this bridge initially rises before gradually decreasing, reaching a maximum flow rate of 1.606 m/s. Notably, the welding wire lags approximately 0.6 mm behind the laser's focal point, with the narrowest width of the liquid bridge measuring about 0.89 mm. Based on the simulation results and considering the melting transition time of the welding wire, the initiation time for the welding wire has been further adjusted to the first 10 ms when the gap threshold reaches 0.2 mm. Experimental verification confirms the successful laser welding of a 2 mm variable gap structure thin plate. This study elucidates the melt pool flow, keyhole fluctuations, and metal transition behaviors during the laser welding process, contributing to a deeper understanding of the complex heat and mass transfer dynamics inherent in variable gap structure laser self-melting and wire-filling welding. Ultimately, these insights aim to enhance the application of laser welding in adaptive welding for large structural components.

Groove Gap Bridging Ability of Laser-arc Hybrid Welding

Research on weld formation mechanism of laser-MIG arc hybrid welding with butt gap

Microstructure and Mechanical Properties of Narrow Gap Laser-Arc Hybrid Welded 40 mm Thick Mild Steel

Progress on laser-plasma arc hybrid welding

Narrow Groove Laser-Arc Hybrid Welding of Thick-Sectioned HSLA Steel Using Laser Beam Oscillation

Effect of Process Parameters on the Formability, Microstructure, and Mechanical Properties of Laser-Arc Hybrid Welding of Q355B Steel

Penetration status of carbon dioxide laser-MIG hybrid butt welding with various parameters

Research on the dynamic process and defect formation in laser-arc hybrid welding of 12-mm thick AH36 steel

Effects of heat source configuration on the welding process and joint formation in ultra-high power laser-MAG hybrid welding

Welding stability and fatigue performance of laser welded low alloy high strength steel with 20 mm thickness

Arc and keyhole behavior in narrow-gap oscillating laser-MIG hybrid welding of thick aluminum alloys

Impact of Melt Flow and Surface Tension on Gap Bridging During Laser Beam Welding

Effects of laser-arc hybrid welding on microstructure and mechanical properties of dissimilar steel joint

The influence of the arrangement for fiber laser and TIG on the hybrid welding process

Deep-penetration welding-brazing of aluminum/steel dissimilar metal using laser-MIG arc hybrid heat source

A novel high efficiency narrow-gap laser welding technology of 120 mm high-strength steel

Documenting weld pool behavior differences in variable-gap laser self-melting and wire-filling welding of titanium alloys

Laser-Arc Hybrid Welding Process and Joint Performances of 6106-T6 Aluminum Alloy Profiles for High Speed Trains

Experimental study on gap bridging in contour laser transmission welding of polycarbonate and polyamide

Process stability during fiber laser-arc hybrid welding of thick steel plates

Influences of laser on the energy parameters of the electric arc in the case of laser-MIG hybrid welding