Improved semi-analytical solution for longitudinal mechanical response of tunnels crossing active faults considering nonlinear soil-tunnel interactions and shear effects
Henghong Yang,Mingnian Wang,Xiao Zhang,Li Yu
DOI: https://doi.org/10.1016/j.tws.2024.111561
IF: 5.881
2024-01-08
Thin-Walled Structures
Abstract:Tunnels crossing active faults are susceptible to severe damage. This study establishes an improved semi-analytical methodology for analyzing the mechanical responses of tunnels subjected to active fault dislocation. The methodology incorporates nonlinear axial, transverse, and vertical soil-tunnel interactions, shear effects, and geometric nonlinearity within its governing equations. Compared with existing methods, the proposed method has a significantly extended application range with improved accuracy, and the solution procedure demonstrates exceptional computational efficiency, with each case typically being solved in less than 1 s. The proposed methodology demonstrates outstanding qualitative and quantitative agreement with 3D FEM results across various fault types, as well as with the results obtained from the model test. Additionally, neglecting shear effects results in approximately 1.11 to 1.20 times higher bending moments and 1.13 to 1.19 times higher shear forces of the tunnel. Finally, a parametric analysis was conducted based on the proposed methodology to investigate the influence of critical parameters, such as fault displacement, buried depth, tunnel diameter, soil cohesion, and soil friction angle, on the tunnel response under fault dislocation. The results suggest that the tunnel responses positively correlate with the fault displacement, buried depth, and soil cohesion. Increasing the fault displacement amplifies the vertical shear force and bending moment asymmetry while increasing buried depth reduces this asymmetry. An increase in the tunnel diameter and soil friction angle is associated with a decrease in the peak axial force and an increase in the vertical shear force and bending moment. Additionally, variations in the friction angle do not exert a significant effect on the transverse shear force and bending moment.
engineering, mechanical,mechanics, civil