Abstract:Phase-transformations and microstructural evolution during and after inter-critical annealing of a low-alloy, dual-phase steel are studied utilizing dilatometric measurements, and microstructural characterization methods, including scanning electron microscopy, synchrotron X-ray diffraction, and atom-probe tomography. Dilatometric measurements reveal that the sample contains ~72% austenite, after annealing for 5-min at 871 oC, which agrees with the water-quenched microstructure, and ~90% after further annealing to 1 h, which agrees with thermodynamic predictions. A continuous-cooling transformation (CCT) diagram is constructed, within the cooling-rate range between 1 oC/s and 70 oC/s. The incubation time for the ferrite-transformation is <1 s, after inter-critical annealing, and the secondary-phases are mainly pearlite for cooling-rates of <5 oC/s, and martensite for cooling-rates >10 oC/s, which is confirmed utilizing scanning electron-microscope observations. The microhardness increases as the cooling rate increases, and an abrupt slope-change is explained by the major secondary-phase changing from martensite to pearlite between 5 oC/s and 10 oC/s. Atom-probe tomography demonstrates the coexistence of martensite and pearlite as secondary-phases for 30 oC/s and a switch in austenite-ferrite transformation mechanisms from para-equilibrium (70 oC/s) to partitioning local-equilibrium (30 oC/s). A microstructural map is constructed to reveal the austenite decomposition products in the cooling-rate range between 1 oC/s and 70 oC/s. Based on composition measurements of the matrix, utilizing APT, the effects of cooling-rates on solid-solution-strengthening are estimated, and the results demonstrate that solid-solution strengthening, especially carbon-redistribution, accounts for the majority of the strength variations due to different cooling-rates. (239 words)

Experimental research on the melting behavior of Pt-C Eu-tectic fixed point affected by thermal history

On the Freezing and Melting Behavior of the Eutectic Pt–C

Atom-probe tomographic and dilatometric studies of phase-transformations after inter-critical annealing of a low-carbon dual-phase steel

The evolution of microstructure, martensitic transformation and mechanical properties in Ti–V–Al-based shape memory alloys with changing annealing temperatures

A Numerical Investigation Of Constrained Melting Of Nanostructure-Enhanced Phase Change Materials In A Rectangular Cavity Heated From Below

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

Effect of Annealing on Microstructures and Properties of TC4 Heat Dissipation Structure Prepared by LPBF

Molecular Dynamics Simulations of PtTi High-Temperature Shape Memory Alloys Based on a Modified Embedded-Atom Method Interatomic Potential

Microstructure Evolution of the Phase Change Material Tisbte

Thermal modification of brittle CoFeNi2(Ti3Si5)0.16 eutectic high-entropy alloy by annealing treatment

Study of Smtm7.3 Microstructure by A Simplified Method and Its Correlation to Properties

Microstructural evolution of Fe/Ti multilayers submitted to in situ thermal annealing

Role of Site-selective Doping on Melting Point of CuTi Alloys: A Classical Molecular Dynamics Simulation Study

Introducing the chemical potential of Cu–Mn–Al alloys for structural, electrical and thermal properties

Effects of Severe Plastic Deformation and Subsequent Annealing on Microstructures of a Ni50.6Ti49.4 Shape Memory Alloy

Fe–Mn–Si–Cr–Ni Based Shape Memory Alloy: Thermal and Stress-Induced Martensite

Experimental study on the melting performance of phase change materials embedded with different material skeletons

Effect of Elevated Temperature and Annealing Time on Mechanical Properties of Ti/Cu Bimetal

Experimental and numerical investigation of the melting process and heat transfer characteristics of multiple phase change materials

Transformation Behaviour with Thermal Cycling in Ti50Ni43Cu7 Shape Memory Alloy

Effect of aging temperature on the heterogeneous microstructure and mechanical properties of a 12Cr–10Ni–Mo–Ti maraging steel for cryogenic applications