Abstract:This study measured polarization curves as well as the high-frequency resistance of active direct methanol fuel cell (DMFC) operates at around 80 degrees C with active controls of temperature, methanol concentration, airflow rate, and relative humidity. The relative humidity of the air did not have noticeable impacts on the fuel cell unless the operating temperature was near the evaporation temperature of water (100 degrees C). The hydrophobic water management layer (WML) between the membrane electrode assembly (MEA) and cathode air channel increases the mass transfer resistance and improves the water retention in MEA. Adding a WML increased the peak power density, decreased the ohmic resistance, and improved the fuel efficiency of the fuel cell, especially when it operated near 100 degrees C. This study also quantitatively measured methanol and water crossover as well as the fuel efficiency at different operating currents. The fuel efficiency increased significantly with the increase of the current density. Using a hydrophobic fuel management layer (FML) between the anode fuel channel and MEA reduced the fuel and water crossover rates and increased the ohmic resistance due to the decrease of the water content of the Nafion membrane. The FML improved fuel efficiency by reducing the methanol crossover. The combination of the FML and WML enabled the steady operation of DMFC using highly concentrated methanol solutions (up to 75 wt%). (C) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

CHARACTERISTICS OF EXERGY TRANSPORT AND ENERGY UTILIZATION IN DIRECT METHANOL FUEL CELL

Exergy flow and energy utilization of direct methanol fuel cells based on a mathematic model

RECENT ADVANCES IN UNDERSTANDING OF MASS TRANSFER PHENOMENA IN DIRECT METHANOL FUEL CELLS OPERATING WITH CONCENTRATED FUEL

Exergy analysis of ethanol and methane fed molten carbonate fuel cell system

Characteristics of Heat and Mass Transport in a Passive Direct Methanol Fuel Cell Operated with Concentrated Methanol

Performance analysis and multi-optimization of direct methanol fuel cell based on a novel numerical model considering mass transfer

Numerical simulation on mass transport in a passive vapor-fed direct methanol fuel cell operating with neat methanol

Two-phase Modeling of Mass Transfer Characteristics of a Direct Methanol Fuel Cell

Modeling of the Transport Phenomena in Passive Direct Methanol Fuel Cells Using a Two-Phase Anisotropic Model

Two-phase, Mass-Transport Model for Direct Methanol Fuel Cells with Effect of Non-Equilibrium Evaporation and Condensation

Effect of flow characteristics and temperature on performance and efficiency of a direct methanol fuel cell stack

Non-isothermal modeling of direct methanol fuel cell

Operational and Structural Aspects of a Vapor-Feed Semi-Passive Direct Methanol Fuel Cell Supplied with Concentrated Methanol

A transient two-phase mass transport model for liquid feed direct methanol fuel cells

A Direct Methanol Fuel Cell with Outstanding Performance Via Capillary Distillation

Heat and mass transfer characteristics in ducted air-breathing direct methanol fuel cells

Transport Phenomena and Numerical Simulation Related to Water in Direct Methanol Fuel Cell

Critical materials and technology in direct methanol fuel cells

Experimental Measurements of Fuel and Water Crossover in an Active DMFC

Modeling of water transport through the membrane electrode assembly for direct methanol fuel cells

Design and Utilization of a Direct Methanol Fuel Cell