Abstract:All spacecrafts in low orbit are subjected to hypervelocity impacting by meteoroids and space debris. These impacts can damage spacecraft flight-critical systems, leading to catastrophic failure of the spacecraft. In order to protect the safety of an orbiting spacecraft, the shield for meteoroids and space debris becomes an indispensable factor in the design of a spacecraft, especially those with long orbital life and large size structures. Because the major debris-cloud represents the most severe threat to rear wall integrity, researches on the major debris-cloud features are very important. In this paper, the numerical simulations for major debris-cloud features produced by a sphere projectile normal impacting on a single-sheet bumper at hypervelocity have been carried out using the SPH technique of AUTODYN. The major debris-cloud features include the effects of debris-cloud morphology, normalized axial velocity and radial velocity. These features vary with bumper-thickness-to-projectile-diameter ratios (t/D) and impact velocities. The impact velocities are from 1 to 14km/s. The bumper and projectile materials are aluminum. The ratio t/d is from 0.0105 to 0.525. Effects of impact velocity and t/d on the major debris-cloud features have been investigated. It is shown that the major debris-cloud features have remarkable differences with various t/d and impact velocities. As the t/D ratio is increased and impact velocity is constant, the major debris-cloud morphology varies. The diameter of center element and the radial debriscloud velocities increases. At the same time, radial expansion and the shell of spall fragments at the rear element, size of fragments in the center and rear elements and the axial debris-cloud velocities decreases. As t/D ratio is held constant, debris-cloud hardly occurs at the low velocity. As the impact velocity increases, fragmentation of sphere and radial expansion of internal elements increase. At the same time, the axial debris-cloud velocities increase and the radial debris-cloud velocities increase. The simulation results show that the bumper thickness has an optimizing value.

Kinematic characteristic of elastic-plastic debris behavior in vehicle collision

Collision and Rebound Behavior of Elastic Circular Ring Impinging on Elastic Column

Dynamic Behavior of Elastic Bars and Beams Impinging on Ideal Springs

A Method of Reconstruction of Vehicle Collision Accidents Based on Body Deformation

Investigation into Debris Cloud Characterizations for Oblique Hypervelocity Impact of Projectiles on Bumper

Numerical Simulation of Major Debris-Cloud Features Produced by Projectile Hypervelocity Impact on Bumper

Collision and Rebound of Ping Pong Balls on A Rigid Target

Numerical Simulation of Hypervelocity Impact on Mesh Bumper Causing Fragmentation and Ejection

Numerical Simulations of Fragmentation Onset Velocity of Projectile Impact on Thin Bumper

Correlation study between the square cone energy-absorbing structure and the frontal collision behavior of leading vehicles

Model for the Deceleration of Secondary Debris Produced by Hypervelocity Impact on Pressure Vessels

Numerical Simulation Investigation into Projectile Shape Effects in Hypervelocity Impacts

Numerical simulation of characteristics of debris cloud produced by projectile hypervelocity impact on bumper

Study on Vehicle Body Structure Deformation Modes in Frontal Crash

Numerical Simulation of Debris Cloud Produced by Ellipsoidal Projectile Hypervelocity Impact on Bumper

Adjusting the catastrophic collision model using outer probability measure theory

Computer simulation on elastro-plastic collision of spheres

Reconstruction of Car-Pedestrian Collision Based on Computer Simulation

Transient Impact Response Analysis of an Elastic–plastic Beam

The collision behaviors of non-spherical regular particle-wall in three-dimensional space: Modeling investigation

Virtual Reconstruction of Vehicle Crash Accident Based on Elastic-Plastic Deformation of Auto-Body