Abstract:Abstract With the continuous enhancement of China’s economic strength, the scale and quantity of expressway construction are constantly improving, and the expressway network has basically covered the whole country. With the rapid increase of the number of vehicles, the traffic pressure is also increasing, which poses a more serious challenge to keep the expressway unblocked. First, the increasing traffic pressure is very likely to lead to the occurrence of various emergencies. Second, the completely closed expressway and non-central city promote the emergence of an independent environment, which makes the expressway once an emergency, will have a very negative impact on the effective use of the expressway. Third, every single accident on the expressway will lead to serious traffic jam. At the same time, if the emergency rescue on the expressway is not properly implemented, it will not only bring all kinds of negative obstacles to people’s lives, but also seriously affect people’s property safety and social order stability. Therefore, the construction and improvement of the expressway emergency and related emergency rescue system has gradually become the focus of people’s attention. Traffic management and control under incident conditions is an important link in the emergency rescue system, so this paper conducts research on traffic management and control measures under emergency conditions. Expressway design phase, normally takes into account the traffic management and control measures, such as the location of the median opening, the location of the emergency rescue centre, and the traffic organization mode. However, in-depth research should be carried out to ensure its rationality. This paper takes as an example of an expressway in our country, based on VISSIM simulation technology, quantitative analysis was carried out on the design phase of the traffic management and control measures, provide the basis for the optimization of traffic management and control measures. The evaluation method proposed in this paper is universal, and other expressways can also use this method to evaluate the effectiveness of traffic management and control measures in the design stage.

Analysis and simulation of traffic state on expressway during incident

Based on Simulation Method for Solving Traffic Jam Problems.

Analysis of Traffic Flow Characteristics under Large Volume in Highway Tunnel Group Region

Modeling the Evolution of Incident Impact in Urban Road Networks by Leveraging the Spatiotemporal Propagation of Shockwaves

Study on the Method of Traffic State Change Time on Urban Expressway

Simulation of the Frontage Road Control Near the Expressway Exit Ramp

Influence of signal on the capacity of signalized intersection

Research on optimization of traffic management and control measures for expressway emergency based on VISSIM simulation

Simulation Study for Truck Restriction Strategies on Jingzang Expressway in Beijing

Method for Congested Traffic Network State Analysis Based on Reasonable Routes

Incident Response Control Model Construction on Expressway

Forecasting Spatiotemporal Boundary of Emergency-Event-Based Traffic Congestion in Expressway Network Considering Highway Node Acceptance Capacity

Simulation study on dynamic response for an intersection

A Simulation-Based Dynamic Traffic Assignment Model for Emergency Management on the Hangzhou Bay Bridge

On the critical conditions of traffic jams

Practical Approach to Determining Traffic Congestion Propagation Boundary Due to Traffic Incidents

Research on En-route Behavior under Short-term Incident

Analysis of the relationship between aggregated traffic volume and traffic conflicts on expressways

Formation and Propagation of Local Traffic Jam

Analysis of safety factors for urban expressways considering the effect of congestion in Shanghai, China

Quantitative Estimation and Analysis of Spatiotemporal Delay Effects in Expressway Traffic Accidents