Abstract:<p>Wavelength-switchable fiber laser systems have many potential applications. Herein, the use of an erbium-doped fiber laser based on parallel fiber Bragg gratings (FBGs) (ASE: amplified spontaneous emission; BRM: broadband reflection mirror; CCD: charged-coupled device; EDFL: erbium-doped fiber laser; FBG: fiber Bragg gratings; IR: infrared; MZI: Mach–Zehnder interferometer; OSA: optical spectrum analyzer; OC: output coupler; PC: polarization controller; SNR: signal-to-noise ratios; 3D: three-dimensional; wavelength division multiplexing (WDM)) is proposed to achieve C + L band triple-wavelength-switchable laser output at approximately 1.5 μm. In the proposed system configuration, three parallel FBGs with different resonant wavelengths were fabricated using an 800 nm femtosecond pulsed laser. The proposed fiber laser incorporates first-order FBGs with the periods of 538, 542, and 547 nm. The femtosecond laser was propagated through polyimide coating and cladding and was focused onto the fiber core by a 63× oil lens, while FBGs were inscribed with the use of a point-by-point method to generate resonant wavelengths at 1555.3, 1569.2, and 1583.1 nm. When the FBGs were used as wavelength selectors, a lasing threshold of 85 mW was obtained, and switchable lasing with stable single- and dual-wavelength outputs was achieved based on the adjustment of a polarization controller. Concerning the switchable single-wavelength lasing, the signal-to-noise ratio was greater than 37.23 dB, and the 3 dB linewidth was less than 0.09 nm. The respective power fluctuation measurements were less than 0.22 and 0.68 dB for the single- and dual-wavelength lasers at 26 °C over a scan time of 30 min.</p>

Single-longitudinal-mode erbium-doped fiber laser based on a fiber-Bragg-grating pair

A 100 Mw-Level Single-Mode Switchable Dual-Wavelength Erbium-Doped Fiber Laser

Two-Frequency Brillouin Fiber Laser Based on Bragg Grating Fabry-Perot Cavity

Single-polarization, switchable dual-wavelength erbium-doped fiber laser with two polarization-maintaining fiber Bragg gratings

Linewidth compression of a single longitudinal mode ytterbium-doped fiber laser based on femtosecond laser fabricated fiber Bragg gratings

Dual-Wavelength Er-Doped Fiber Laser Based on Phase Sampled Fiber Bragg Grating

Short monolithic dual-wavelength single-longitudinal-mode DBR phosphate fiber laser

Single- and dual-wavelength fiber laser with multi-transverse modes

Switchable multiwavelength ytterbium-doped double-clad fiber laser based on a multimode fiber grating

Dual-Wavelength Single-Longitudinal-Mode Polarization-Maintaining Fiber Laser and Its Application in Microwave Generation

Narrow Line-Width Ytterbium-Doped Fiber Ring Laser Based on Saturated Absorber

Switchable dual-wavelength Raman erbium-doped fibre laser

A Widely Tunable Single-Longitudinal-mode Ytterbium-Doped Fiber Laser Based on Fiber Lyot Filter

High-order mode fiber laser based on few-mode fiber gratings

Single Longitudinal Mode Narrow Linewidth Thulium-Doped Fiber Laser Based on a Eye-Shaped Dual-Ring Filter

Switchable Dual-Wavelength Ytterbium-Doped Fiber Laser Based on a Few-Mode Fiber Grating

Highly efficient dual-wavelength ytterbium-doped fiber linear cavity laser based on cascaded fiber Bragg gratings

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

Stable single-mode compound-ring erbium-doped fiber laser

Single-polarization, dual-wavelength mode-locked Yb-doped fiber laser by a 45°-tilted fiber grating

Wavelength-switchable erbium-doped fiber laser incorporating fiber Bragg grating array fabricated by infrared femtosecond laser inscription