Abstract:Purpose To eliminate the angle deviation of magnetic encoder, this paper aims to propose a compensation method based on permanent magnet synchronous motor (PMSM) sensorless control. The paper also describes the experiments performed to verify the validity of this proposed method. Design/methodology/approach The proposed method uses PMSM sensorless control method to get high precision virtual angle value, and then get the deviation value between virtual position and magnetic angle which is used as compensation table. Oversampling linear interpolation tabulation method has been proposed to eliminate the noise signals. Finally, a magnetic encoder with precision (repeatability) 0.09° and unidirectional motion precision 0.03 is realized. The control system with an encoder running at 14,000 and 0.01 r/min showing high motion resolution is also realized. Findings Higher value of current in PMSM leads to a magnetic encoder with higher precision. When using oversampling linear interpolation to tabulate the compensation table, it is understood that more oversampling does not lead to a better result. Finally, validated by experiments, using eight intervals to calculate the mean value of angle deviation leads to the best result. Practical implications The angle deviation compensation method proposed in this paper has a great practical implication and a good commercial application. The method proposed in this paper could be effectively used to self-correct the magnetic encoder using arctangent method and also correct any rotary encoder sensor. Originality/value This paper originally proposes an adaptive correction method for a rotary encoder based on PMSM sensorless control. To eliminate the noise signals in an angle compensation table, over-sampling linear interpolation tabulation method has been proposed which also guarantees the precision of the compensation table.

Research On Rotating Encoder Zero-Position Location Based On Missile Steering Gear

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

Backstepping Position Tracking Control for Permanent Magnetic Synchronous Motor Servo System

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

Position Servo Control Technology Based on Sliding Mode Variable Structure for Permanent Magnet Linear Synchronous Motor

Zero-Position Offset Calibration of PMSM Based on I/F Control Strategy and Slide Mode Observer for Electric Power Steering System

A Novel Start Strategy For Permanent Magnet Synchronous Motor

Research on High Precision Drive System of Permanent Magnet Synchronous Motor

Magnetic Rotary Encoder and Its Application in PMSM

Technology of Position Servo Magnetic Encoder Based on Industrial Robot

The Position Servo Control Strategy of High Dynamic Response Based on Electric Steering Gear

An Improved PMSM Rotor Position Sensor Based on Linear Hall Sensors

The Study of an Electromechanical Actuator with a Resolver As the Position Sensor

Simulation and Design of Servo-system With Permanent Magnet Synchronous Motor Based on Torque-angle Control

Method for Measuring Initial Position of Motor Rotor of a Digital Servo System

Absolute Position Acquisition for Linear Synchronous Motor with Passive Mover

Vector Control of High Speed PMSM Based on Single-Pole Magnetic Encoder

High Precision Control System Design and Implementation of Outer-Rotor Permanent Magnet Motor with Dual Magnetic Sensors

Study of Rotor Position Detection Method for Linear Synchronous Motor

Study on High Precision Magnetic Encoder Based on Pmsm Sensorless Control

A Precise Modeling Method for PMSM Servo System of Spacecraft