Abstract:There are three difficulties in the topology optimization problem of continuum structure:1) The problem under multiple load case is not easy to be approached than that under single load case, because the former becomes a multiple objective problem on the basis of compliance objective function. 2) The problem with local constraints, such as elemental stress limit, is not easy to be solved than that with global constraints, such as displacement or frequency limits, because sensitivity analysis of the former has too expensive computation. 3) The problem with a phenomenon of ill-conditioned load, which is similar to ill-conditioned stiffness matrix in the structural analysis, is not easy to get reasonable final topological structure, because the former is difficult to consider different influences between the loads with small forces and the loads with big forces, and some of topology paths of transferring small forces may disappear during the process of iteration. To overcome the above difficulties, some measures are adopted as follows:1) Topology optimization model is established by independent continuous mapping (ICM) method. 2) Based on the von Mises criteria in theory of elastic failure, all element’ s stress constraints are transformed into a structural energy constraint, namely, a global constraint substitutes for lots of local constraints. 3) The phenomenon of the ill-conditioned load is divided into three cases: (a) Ill-condition exists between load cases, but not within each load case; (b) Ill-condition exists within some load case; (c) Ill-condition exists not only between load cases, but also within some load case. (4) A strategy based on strain energy is proposed to adopt ICM method with stress globalization, and the problems of the three cases of ill-conditioned load mentioned above are solved in term of different complementary approaches one by one. Numerical examples show that the topology path of transferring forces can be obtained more easily by substituting global strain energy constraints for local stresses constraints, and the problem of ill-conditioned load can be solved well by the weighting method which takes structural energy as weighting coefficient.

A new boundary search scheme for topology optimization of continuum structures with design-dependent loads

Topology Optimization of 3D Structures with Design-Dependent Loads

A Novel Application Framework for Self-Supporting Topology Optimization

Topological Optimization of Continuum Structures with Design-Dependent Surface Loading – Part I: New Computational Approach for 2D Problems

The Path-Engulfment Method for Topology Optimization of Structures

TOPOLOGY OPTIMIZATION OF CONTINUUM STRUCTURES WITH DESIGN-DEPENDENT TIME-HARMONIC HYDRODYNAMICSURFACE PRESSURE

Topological Optimization of Continuum Structures with Design-Dependent Surface Loading – Part II: Algorithm and Examples for 3D Problems

2D Minimum Compliance Topology Optimization Based on a Region Partitioning Strategy

A boundary density evolutionary topology optimization of continuum structures with smooth boundaries

A topology, material and beam section optimization method for complex structures

Topology optimization of compliant mechanisms and structures subjected to design-dependent pressure loadings

Topology Optimization of Continuum Structure With Globalization of Stress Constraints

TOPOLOGY OPTIMIZATION OF CONTINUUM STRUCTURES SUBJECTED TO SELF WEIGHT LOADS

On topology optimization of design-dependent pressure-loaded three-dimensional structures and compliant mechanisms

Adaptive scaled boundary finite element method for two/three-dimensional structural topology optimization based on dynamic responses

Finite Strain Topology Optimization with Nonlinear Stability Constraints

Efficient topology optimization for geometrically nonlinear multi-material systems under design-dependent pressure loading

Topology optimization with continuously varying load magnitude and direction for compliance minimization

Guide-weight Method on Solving Topology Optimization Problems under Single Load Case

Sequential topology and shape optimization framework to design compliant mechanisms with boundary stress constraints

Manifold-based material field series expansion method for topology optimization on free-form surfaces